ANCOR SDN BHD
Tel: +6012-921 3877 ;
       +603-58797121
Fax:+6018-635 1593
Email: info@ancor.com.my ;
           ancor.my@gmail.com
D-2-4, Setia Walk,
Pusat Bandar Puchong,
47160 Puchong, Selangor
   Home      Dwyer Flowmeter      Flow
 
 
 

Flow

Controllers, Fittings, Indicators, Monitors, Orifice Plates, Sensors, Switches, Totalizers, Transmitters, Water Meters, and Accessories for Flow
 
 
 

Mass Flowmeters and Controllers

Sensors that indicate flow rate for low flow systems.
 
 
 
Series DMF
 
Digital Mass Flow Controller
Programmable, RS485 Interface, Up To 500 psig, ±1% Accuracy
 
 
  • Program, record, analyze, and control flow rates of various gases with Series DMF Digital Mass Flow Controller.
  • Controllers are designed with straight tube sensors with restrictor flow elements to ensure laminar gas flow for accurate and repeatable results.
 
 
Series GFC
 
Gas Mass Flow Controllers
Flow Range Up to 1000 L/min, Pressures Up to 1000 psi, NIST Traceable
 
  • Provides high accuracy and repeatability
  • Flow rates are virtually unaffected by temperature and pressure variations
  • Utilizes an electromagnetic valve and PID electronics to maintain continuous control by comparing measured sensor signal set to flow rates
 
Series GFM Gas
 
Mass Flow Meter
Flow Range Up to 1000 L/min, Pressures Up to 500 psi, NIST Traceable
 
  • Combine a straight tube sensor with a restrictor flow element to provide high accuracy and repeatability.
  • Flow rates are virtually unaffected by temperature and pressure variations.
  • Actual gas flow is displayed in engineering units on a 3-1/2 digit, 90° tiltable LCD readout.
 
 
Series GFM2
 
Gas Mass Flow Meter
±1% FS, Programmable Relays
 
 
  • Utilizes a straight tube sensor with a restrictor flow element to provide a high ±1% FS accuracy and ±0.25% FS repeatability
  • Gas flow can be displayed in 23 different engineering units on an optional 2x16 character LCD display with internal conversion factors for up to 32 gases
 
Series GFM3
 
Gas Mass Flow Meter
Flow Monitoring, Push-Button Configuration
 
  • This digital flow meter features a 12-digit totalizer for total gas volume indication, and is available in the choice of 0 to 5 VDC, 0 to 10 VDC, or 4 to 20 mA output signals.
  • Standard LCD and four button keypad allows easy access to the many features of the GFM3.

 
Series GFM4
 
Gas Mass Flow Meter
Pressure, Temperature and Flow Monitoring
 
  • This multi parameter flow meter supports various functions such as flow totalizer, flow, temperature, and pressure alarms, and is available in a choice of 0 to 5VDC, 0 to 10VDC, or 4 to 20 mA output signals.
  • Standard LCD and four button keypad allows easy access to the many features of the GFM4.
 
 
 
 

Flow Sensors

Sensors for measuring flow rate.

 
 
Model A-471
 
Portable Kit
 
 
 
 
  • Suited for use as a read-out device with the DS-300 Flow Sensors.
  • The gage may be used on system pressures of up to 500 psig even when the flow sensor differential pressure to be read is less than 0.5" w.c.
  • With accuracy of ±3% of full scale, the Capsuhelic® gage can be used in ambient temperatures from 32 to 200°F (0 to 93.3°C).
 
Series DS
 
In-Line Flow Sensors
Use with the Dwyer® Differential Pressure Gages or Transmitters
 
 
  • Are two Series of averaging Pitot tubes for compatible gases and liquids that provide accurate and convenient flow rate sensing, for schedule 40 pipe, when purchased with suitable differential pressure gage with appropriate range.
  • The Series DS-300 Averaging Flow Sensors are designed to be inserted in the pipeline through a compression fitting and available for pipe sizes from 1 to 10" (2.5 to 25.4 cm).
 
Series TTM
 
Electronic Totalizing Meter
Batch or Cumulative Totals, Easy-to-Read LCD Display, ±5% Accuracy
 
  • Easily view batch and cumulative totals on the large 4-digit LCD display
  • Resettable batch totals ideal for totalizing a single use
  • Cumulative total will automatically reset to zero when a maximum reading of 9999 is obtained
  • Models designed for use in water applications are constructed of Nylon® and rated to 150 psig (10.3 bar)

 
 

Sight Flow Indicators

Local visual indicators of flow rate.

 

 
Series SFI-100 & SFI-300
 
MIDWEST Sight Flow Indicator
Inexpensive Protection for Expensive Equipment and Systems
 
  • Manufactured of quality materials and safety tested to assure long, dependable service at economical prices.
  • The 100 and 300 Series offer threaded process connections, viewing windows, and bodies of brass or 316 SS.
  • The 100 type has a single window with a rotating impeller, the 300 type has a double window with a rotating impeller

 
Series SFI-300F
 
MIDWEST Sight Flow Indicator
Inexpensive Protection for Expensive Equipment and Systems
 
  • Manufactured of quality materials and safety tested to assure long, dependable service at economical prices.
  • The 300F Series offer ANSI flange process connections, double viewing windows, and bodies of carbon steel or 316 SS.
  • The 350F type has a double window with no moving indicator and the 360F type has a double window with a flapper.
 
 
Series SFI-400
 
MIDWEST Sight Flow Indicator
Inexpensive Protection for Expensive Equipment and Systems
 
  • Manufactured of quality materials and safety tested to assure long, dependable service at economical prices.
  • The 400 Series offer threaded or ANSI flanged process connections, tube style viewing, and bodies of cast iron or 316 SS.
  • Featured in the 400 is glass tube construction offering easy flow viewing from any angle.
 
Series 500
 
Sight Window
Shows Level or Contents of Tanks, Pipelines; Tempered, Replaceable Glass Window
 
  • Tough, tempered glass window resists chemical attack and abrasion.
  • Seamless gasket assures perfect seal and is easily field replaceable.
  • In addition to the standard brass body, Model 500 Sight Windows are also available in carbon steel or 316 stainless steel to suit a wide range of chemical compatibility.
 
 
Series 550
 
Sight Window
Shows Level or Contents of Tanks, Pipelines; Fused Glass and Steel Construction
 
  • Fused glass style sight windows feature glass to metal bond for utmost reliability.
  • Plated steel bodies have convenient hex wrench surfaces.
  • Connections are standard NPT in sizes from 1/4" to 2".
  • Windows are clear, ripple free, and flush with the front face, having no recess on which dirt might collect.
 
Series SFI-700
 
MIDWEST Sight Flow Indicator
Inexpensive Protection for Expensive Equipment and Systems
 
  • Manufactured of quality materials and safety tested to assure long, dependable service at economical prices.
  • The 700 Series offer threaded process connections, tube style viewing, and bodies of brass or 316 SS.
  • Featured in the 700 is a bright red Acetal rotating impeller that is easy to view from any angle with the glass tube construction.
 
 
 
 

Flow Indicators / Controllers

Remote flow indicators and controllers for use with flow transmitters.

 
 
 
Series PPM Pulse Panel Meter
 
1/8 DIN, Dual-Line 6-Digit Display, Flow Rate and Totalizer
 
  • Unique, rugged, NEMA 4X front panel design that makes it nearly impenetrable in typical applications.
  • The weatherproof, UV resistant, large, dual line display allows for more information, making it easier to read and simpler to program.
  • The intensity of the display can be adjusted allowing this meter to be utilized in dark rooms as well as outdoors, due to its sunlight readable display.
  • It features up to eight visual alarm set points to trigger certain events and three function keys which can be programmed to provide direct menu access.
 
Series MPM Multi Panel Meter
 
1/8 DIN, Dual-Line 6-Digit Display, Multi-Pump Alternation Control
 
  • Three levels of password protection
  • Math functions for flow & round horizontal tanks
  • 32-point, square root or exponential linearization
  • Multi-pump alternation control
  • Two or four relays & isolated 4 to 20 mA output options
  • External 4-relay & digital I/O expansion modules
  • RS-232, RS-422/485 serial communication options
  • Rate displayed as units per second, minute, hour, or day
  • Total, grand total or non-resettable grand total
 
 
 

Flow Transmitters

Sensors with an electrical transmission output for remote indication of flow rate.
 
 
 

Turbine, Adjustable Insertion

Turbine sensors with electrical transmission output for remote indication of liquid flow rate. Adjustable insertion length models.

 
 
 
Series TFP-LI
 
Liquid Turbine Flow Meter
PPS Body, 0 to 5 VDC Output, LCD Indication
 
  • Suitable for a wide variety of industrial, commercial, and laboratory flow applications.
  • These meters utilize a turbine wheel and electro-optical detection to convert flow rates into a linear 0 to 5 VDC output signal for recording and data logging.
  • A 3-1/2 digit LCD informs the user of the actual flow rate.
 
Series TFP-GI
 
Gas Turbine Flow Meter
PPS Body, 0 to 5 VDC Output, LCD Indication
 
  • Suitable for a wide variety of industrial, commercial, and laboratory flow applications.
  • These meters utilize a turbine wheel and electro-optical detection to convert flow rates into a linear 0 to 5 VDC output signal for recording and data logging.
  • A 3-1/2 digit LCD informs the user of the actual flow rate.
 
Series TFM-LI
 
Liquid Turbine Flow Meter
316SS Body, 0 to 5 VDC Output, LCD Indication
 
  • Suitable for a wide variety of industrial, commercial, and laboratory flow applications.
  • These meters utilize a turbine wheel and electro-optical detection to convert flow rates into a linear 0 to 5 VDC output signal for recording and data logging.
  • A 3-1/2 digit LCD informs the user of the actual flow rate.
 
Series TFP-LP
 
Liquid Turbine Flow Meter
PPS Body, 0 to 5 VDC and Pulse Outputs
 
  • Suitable for a wide variety of industrial, commercial, and laboratory flow applications.
  • These meters utilize a turbine wheel and electro-optical detection to convert flow rates into a linear 0 to 5 VDC output signal for recording and data logging.
  • Couple this unit with a Series TM2 Flow Totalizer for a remote flow monitoring display.
 
Series TFP-GV
 
Gas Turbine Flow Meter
PPS Body, 0 to 5 VDC Output
 
 
  • Gas Flowmeters utilize a turbine wheel and electro-optical detection to convert flow rates into a linear 0 to 5 VDC output signal for recording and data logging.
  • A power adapter or mating cable assembly is required for operation.
  • Corrosion resistant PPS body
  • High repeatability with patented microturbine design
 
Series TFM-LP
 
Liquid Turbine Flow Meter
316SS Body, 0 to 5 VDC and Pulse Outputs
 
  • Liquid Flowmeters utilize a turbine wheel and electro-optical detection to convert flow rates into a linear 0 to 5 VDC and pulsed output signal for recording and data logging.
  • A power adapter or mating cable assembly is required for operation
  • Rugged 316 SS body
  • High repeatability with patented microturbine design
 
 
 
 

Turbine, In-Line

Shuttle, differential pressure, and calorimetric sensors with electrical transmission output for remote indication of liquid flow rate. Flow through in-line models.

 
 
 
Series HFT
 
In-Line Flow Transmitters
Local Flow Indication, Unrestricted Mounting, 4 to 20 mA, 0 to 5 V, and 1 to 5 V Output
 
  • Provides analog output to monitor application flow and integral direct reading scale to provide local indication of flow rate
  • Increased application versatility with no inlet or outlet straight plumbing requirement and can be mounted horizontally, vertically, or inverted
 
Series CAM
 
Compressed Air Meter
Steady-State and Cumulative Totals PNP/4-20 mA Output
 
  • Operates by the calorimetric measuring principle to detect the standard volume flow of operating compressed air.
  • It is designed specifically to evaluate the current flow rate and the current consumed quantity in compressed air systems.
  • This unit offers a quick, accurate readout.
 
Series TTMP
 
PVC Electronic Totalizing Meter
Batch or Cumulative Totals, Easy-to-Read LCD Display
 
  • Compact modular design ideal for easy portability
  • Easily alternate display from flow rate, batch or cumulative totals in one low cost unit
  • Easy to read LCD display provides instantaneous local indication
  • Included batteries featuring a 5 year life span with no added costs
 
Series TTMS
 
Metal Electronic Totalizing Meter
Batch or Cumulative Totals, Easy-to-Read LCD Display
 
  • Compact modular design ideal for easy portability
  • Easily alternate display from flow rate, batch or cumulative totals in one low cost un
  • Easy to read LCD display provides instantaneous local indicatio
  • Included batteries featuring a 5 year life span with no added cos
 
 
 
 
 

Paddlewheel, Adjustable Insertion

Rotating paddle sensors with electrical transmission output for remote indication of liquid flow rate. Adjustable insertion length models.
 
 
 
Series PFT
 
Paddlewheel Flow Sensor
Non-Magnetic Sensing, Insertion Style for 1-1/2 to 40" Pipe, Pulse or 4 to 20 mA
 
  • Bearings and shaft offer excellent wear protection even in applications with particulate for long life
  • Weatherproof and submersible rated for irrigation applications
  • One unit adjustable over a large pipe size range
  • Multiple wetted material choices offer application versatility
  • Integral 4 to 20 mA output with no need for additional external components
 
Series IPFS
 
Paddlewheel Flow Sensor
Hot-Tap Option, Field Adjustable Insertion, Wide Flow Range
 
  • Available for pipe sizes ranging from 3" to 40" and available in brass, PVC or stainless steel.
  • The Series IPFS has an available hot tap model with a bronze or stainless steel valve assembly.
  • The bearings are made from ruby jewel to reduce the coefficient of friction and maintain high accuracy.
  • The Series IPFS can be purchased with a variety of saddle fittings, Series SDF, that comes in iron or brass.
  • The Series IPFS is good for large pipe and clean water applications.
 
 
 
 

Paddlewheel, Fixed Insertion

Rotating paddle sensors with electrical transmission output for remote indication of liquid flow rate. Fixed insertion length models.

 
 
 
Series PDWS Paddlewheel Flow Sensor
 
Low Friction Bearings, Long Life
 
  • Designed for pipe size ranges from 1/2 to 8" with available materials of brass, stainless steel, PVC, and polypropylene.
  • The Series PDWS is intended to be used with the Series PWF, a wide variety of custom tee, saddle, or welded fittings that come in bronze, PVC, and stainless steel.
  • The bearings are made from ruby jewel to reduce the coefficient of friction and maintain high accuracy
 
Series PWF Fittings and Tees
 
Saddles, Tees, and Weld/Braze Fittings for Series PDWS
 
  • Used with the Series PDWS Insertion Paddlewheel Flow Sensors. The Series PWF allows for accurate sensor insertion of the Series PDWS in a wide range of pipe sizes.
  • These fittings and tees are available in bronze, 304 SS, 316 SS, and PVC, further expanding application prospects.
  • Multiple end connections are available to allow for easy installation in a variety of applications
 
 
 
 
 

Paddlewheel, In-Line

Rotating paddle sensors with electrical transmission output for remote indication of liquid flow rate. Flow through in-line models.
 
 
 
 
Series DFMT
 
Digital Paddlewheel Flow Transmitter
Flow and Total Indication, Easy to Read LCD Display, 4 to 20 mA or Pulse Output
 
  • The large backlit LCD display defines instantaneous as well as cumulative flow with visual indication bar designating percent of max flow
  • Long operation life with high accuracy paddlewheel technology and corrosion resistant PVDF sensor

 
Series DFMT2
 
Digital Paddlewheel Flow Transmitter
Flow and Total Indication, Easy to Read LCD Display, Remote Indication
 
  • Two piece design allows the user to separate the control display from the application, making it ideal in areas where space is limited
  • The large backlit LCD display defines instantaneous as well as cumulative flow with visual indication bar designating percent of max flow
 
 
Series DPW
 
Digital Paddlewheel
1% FS, Flow and Optional Temperature Readings, Programmable Output
 
 
  • Jewel bearings allow for smooth rotation with minimal wear and low flow monitoring capability
  • Rugged, chemical resistant PVDF lower block material ensures high reliability and longevity for use in harsh environments
  • User-friendly interface allows for easy manipulation
 
Series SFI-800
 
Sight Flow Indicator/Transmitter
Low Cost, Optional Output for Flow Rate and Totalization, UV Stabilized Polycarbonate Model
 
  • Constructed of clear plastic enabling 360° viewing of the rotor for easy flow indication
  • SFI-800 models are constructed of Polysulfone with excellent chemical compatibility, high pressure and temperature ratings, and all wetted materials are FDA/NSF ratable
 
Series SFI-100T
 
Sight Flow Indicator/Transmitter
Output for Flow Rate and Totalization
 
  • Constructed of a robust, solid brass body and a tempered glass window
  • Bright red impeller yields great visual indication of flow through the window
  • Front window can be easily unscrewed to clean out the sight flow indicator
  • Ideal for outdoor applications

 
Series SF
 
Sight Flow Transmitter
±2% FS Accuracy, 4 to 20 mA Output, Pressure up to 500 psig (34 bar)
 
  • Integrates tangential turbine technology with hermetically sealed circuitry to provide accurate flow measurement and control in the harshest environments
  • 2-wire loop-powered design transmits a 4 to 20 mA signal proportional to flow rate for remote flow monitoring

 
Series SF2
 
Sight Flow Meters
SPDT or Pulse Output, Visual Flow Confirmation, Brass Body
 
  • Brass, solid body construction, one piece composite rotor, and ceramic shaft delivers durability with broader chemical, temperature, and pressure capabilities
  • Set points are fully adjustable over the specified flow range
  • The dynamic operation of the rotor guards against jamming and false actuation
 
 
 
 

Electromagnetic, In-Line

Electromagnetic sensors with electrical transmission output for remote indication of liquid flow rate. Flow through in-line models.

 
 
 
Series MFS2
 
Magnetic Inductive Flow Sensor
Lower Cost PVDF Design, Frequency Output, ±1% Accuracy, Maintenance-Free
 
  • Compact, lower cost plastic alternative to the Series MFS.
  • Unlike sensors with moving parts, the MFS2 can be used in applications dealing with contaminated media.
  • This series provides a reliable measuring technique, an obstruction free pipe cross-section, as well as a quick response time, making this series ideal for interference free operation.
 
Series MFS2
 
Magnetic Inductive Flow Sensor
Lower Cost PVDF Design, Frequency Output, ±1% Accuracy, Maintenance-Free
 
  • No moving parts
  • No mechanical wear
  • Maintenance-free
  • Can be applied in applications dealing with contaminated media with no mechanical component in the flow
  • Obstruction free pipe cross-section yields low pressure drop
 
Series FLMG Flanged
 
Electromagnetic Flow Sensor
No Moving Parts, Minimal Straight Pipe Requirement, Unobstructed Flow
 
  • Long life cycle and less frequent maintenance with no moving parts to wear or break and electrodes that discourage fouling
  • Minimum space requirement between the meter and a pipe elbow
  • Rate and total indication are standard on large LCD display
  • Obstruction free pipe cross-section yields low pressure drop

 
 
 

Electromagnetic, Adjustable Insertion

Electromagnetic sensors with electrical transmission output for remote indication of liquid flow rate. Adjustable insertion length models.

 
 
Series IEFS Insertion Electromagnetic Flow Sensor
 
No Moving Parts, Hot-Tap Option, 3 to 48" Field Adjustable Insertion
 
  • Long life cycle and less frequent maintenance with no moving parts to wear or break and electrodes that discourage fouling
  • Unaffected by change in temperature, density, viscosity or concentration
  • Pulse output for use with a variety of displays and controllers for remote reading
  • Easy meter mount display and transmitter accessories for local indication and analog 4 to 20 mA output
 
 
 
 
 
 

Electromagnetic, Fixed Insertion

Electromagnetic sensors with electrical transmission output for remote indication of liquid flow rate. Fixed insertion length models.

 
 
Series EFS2 Insertion Electromagnetic Flow Sensor
 
No Moving Parts, Durable, Easy Installation & Maintenance
 
 
  • Long life cycle and less frequent maintenance with no moving parts to wear or break and electrodes that discourage fouling
  • Unaffected by change in temperature, density, viscosity or concentration
  • Pulse output for use with a variety of displays and controllers for remote reading
  • Easy meter mount display and transmitter accessories for local indication and analog 4 to 20 mA output
 
 
 
 
 

Ultrasonic

Ultrasonic sensors with electrical transmission output for remote indication of liquid flow rate.

 
 
Series PUB
 
Portable Ultrasonic Flowmeter Kit
Portable and Non-Invasive
 
 
  • Utilize the transit-time difference for measuring flow rates in pipes non-invasively.
  • They are compact and lightweight instruments incorporating the latest electronics and signal processing technologies, realizing high performance and easy operation.
  • These devices are perfect for on-the-go flow monitoring, capable of 20 hours continuous operation with built-in, rechargeable battery. 
 
 
Series PUF
 
Portable Ultrasonic Flowmeter Kit
Portable, Non-Invasive and Data Logging Capability
 
  • Two sensors are placed on the exterior of the pipe, and each transmits an ultrasonic pulse through the pipe and fluid to the other.
  • The velocity of the liquid flowing through the pipes causes the pulse to accelerate or decelerate.
  • The difference in the transit times of the two pulses is used to calculate the flow rate.
 
Series TUF
 
Ultrasonic Energy Meter
Energy Monitoring Capability, No Moving Parts, Compact and Light Weight
 
  • Lower maintenance costs with local parameter display and no moving parts
  • Serial communication output allows for easy transfer of data
  • Flow and temperature monitor in one unit eliminates the need for multiple units
 
 
Series UFB
 
Ultrasonic Flowmeter Set
Excellent Performance and Easy Operation
 
  • Utilizes the transit-time difference for measuring flow rates in pipes non-invasively.
  • This is the permanent model, allowing the user to mount the converter on a surface or pipe.
  • FB comes with a sturdy IP65 rating, protecting it from dust and direct water contact.
  • The Series UFB has 4 to 20 mA and pulse output capabilities.
 
 
Series UFC
 
Ultrasonic Flowmeter Set
Excellent Performance and Data Logging Capability
 
  • This is the permanent model, allowing the user to mount the converter on a surface or pipe and easily clamp on the sensors and guide bar.
  • The easy-to-use compact and lightweight design is intended for mechanical devices using ideally homogeneous liquids that contain no air pockets.
  • The Series UFC comes with a sturdy IP65 rating, protecting it from dust and direct water contact.
 
Model UFM
 
Compact Ultrasonic Flowmeter
Cost Effective, Compact & Adjustable Design, Non-Invasive
 
  • Non-invasive pipe measurement
  • Simple installation with all necessary components included such as converter, sensor, cables and mounting accessories
  • Compact and lightweight design, featuring an easily installed, all in one clamp-on unit intended for homogeneous liquids that contain no air
  • Screen offers easy to read text displaying both flow rate and total with a convenient backlight for visual comfort
 
 
 
 

Adjustable Insertion, Fittings

Fittings for insertion flow transmitter products.
 
 
 
 
Series EFF
 
Fittings and Tees
Saddles, Tees & Weld/Brass Fittings for Series EFS2
 
  • The Series EFF allows for accurate sensor insertion of the Series EFF in a a wide range of pipe sizes.
  • These fittings and tees are available in bronze, 304 SS, 316 SS, and PVC, further expanding application prospects.
 
 
Series EFF
 
Fittings and Tees
Saddles, Tees & Weld/Brass Fittings for Series EFS2
 
  • The SERIES EFF Fittings and Tees are used with the Series EFS2 Insertion Electromagnetic Flow Sensors.
  • The Series EFF allows for accurate sensor insertion of the Series EFF in a a wide range of pipe sizes.
  • These fittings and tees are available in bronze, 304 SS, 316 SS, and PVC, further expanding application prospects.
 
 
 
 
 

Accessories

Accessories for flow transmitter products.
 
 
 
 
Series BAT
 
Blind Analog Transmitter
Converts Pulse Frequency to 4 to 20 mA, Loop Powered
 
 
 
 
  • Easy to set up and can be either wall or meter mounted
  • Takes a pulse frequency output from the compatible flow meters and converts it into a continuous 4 to 20 mA analog output signal

 
 
Series FPCA
 
Flow Power/Controls Accessories
Power Supplys & Mounting Options for Series BAT, RTI, PWD, IPFS, TBS, FLMG, PDWS, EFS2, IEFS, IPFS
 
  • Include mounting kits, power converters, and power supplies for compatible flow meters.
  • These accessories simplify installation by offering meter and wall mounting options.

 
Series PWD
 
Pulse Divider
Divides Pulses from 0 to 9999, Easily Adjustable Rotary Switches
 
 
  • Designed for pacing electronic metering pumps.
  • The enclosed rotary switch setting mechanism can be manually set to any number from 0 to 9999 pulses.
  • Once the divider has received the set number of pulses from the meter, it outputs one pulse to stroke the pump.
 
 
Model SPK
 
Solar Panel Kit
Reliable 5 Watt Solar Panel for Remote Applications or Back-Up Power
 
  • The SPK is intended for use with a standard 12V, 22 to 33 amp-hour sealed lead acid battery (not included).
  • It comes standard with a charge controller and corrossion-resistant mounting hardware.
  • The SPK can also be used to provide up to a 40-day back-up power supply for periods of darkness.
 
 
 
 
 
 
Ancor Sdn Bhd
D-2-4, Setiawalk, Pusat Bandar Puchong, 47160 Puchong, Selangor, Malaysia
Tel: +6012-921 3877; +6018-623 5135,
Fax: 6018-635 1593  
Email: info@ancor.com.my ; ancor.my@gmail.com