ANCOR SDN BHD
Tel: +6012-921 3877 ;
       +603-58797121
Fax:+6018-635 1593
Email: info@ancor.com.my ;
           ancor.my@gmail.com
D-2-4, Setia Walk,
Pusat Bandar Puchong,
47160 Puchong, Selangor
   Home      Products      Humidity & Moisture Meter
 
 
 
 
MOISTURE METERS for WOOD & BUILDING MATERIALS
WOOD - TIMBER - BIO FUELS - WOOD CHIPS
PAPER & PAPER BOARD
 
 
 
MC-160SA
Wood and building materials
 
 
  • Pin-less & non-destructive: Capacitance measurement using a high frequency dielectric field
  • Could be used on different materials as wood, concrete, brick and plaster
  • Select from 6 wood groups (about 230 species) or 6 building material groups (E0 - E5)
  • Moisture detection down to depth of 50 mm
  • Low battery warning & Auto power off
  • Impact resistant ABS housing
  • Complete with 9V battery and carrying case
  • MC-160SA: 0 to 98% Relative humidity calculation for building materials @E1
  • MC-160SA: 32 memory locations for average measurement storage in F4
  • Woodworkers
  • Cabinet and furniture makers
  • Flooring installers
  • Contractors and quality assurance inspectors
  • Anyone who needs a professional quality tool to inspect wood and building materials for accurate moisture content or relative humidity.
 
 
MC-380XCA Dual scanning Depth
Wood and building materials
 
 
  • Direct read out of Moisture Content in percent water or in Relative Air Humidity (RH%)
  • Dual scanning Depths (10 mm and 100 mm)
  • Non Invasive measurement
  • Extended Material Selection groups
  • Selectable Alarm Threshold
  • Audio Alarm
  • Hold Function
  • Density selection of wood Groups
  • Woodworkers
  • Cabinet and furniture makers
  • Flooring installers
  • Contractors and quality assurance inspectors
  • Anyone who needs a professional quality tool to inspect wood and building materials for accurate moisture content absolute or relative humidity
  • Woodworkers
  • Cabinet and furniture makers
  • Flooring installers
  • Contractors and quality assurance inspectors
  • Anyone who needs a professional quality tool to inspect wood and building materials for accurate moisture content absolute or relative humidity.
 
 
 
 
MC-500
Wood and building materials
 
 
  • Pin-less & non-destructive: Capacitance measurement using a high frequency dielectric field
  • Could be used on different materials as wood, concrete, cement wash floor, brick, plaster, gypsum board, clinker and clay floor tiles, sandstone, marble, etc.
  • Quickly indicates the moisture content of materials
  • Moisture detection down to a depth of approx. 40 mm
  • Low battery indication
  • Impact resistant ABS housing
  • Complete with 9V battery
  • Detection of moisture in wood and other building materials
  • Detection of leakage
  • Finding electrical cables and reinforcement bars
 
 
 
BDD "mini"
Wood and building materials
 
 
  • Detect dampness and related moisture problems
  • Check surface moisture before painting, varnishing and other surface treatments
  • Locate/trace source for leaks and dampness
  • Is a pin-moisture detector used by Constructors, House inspectors, Woodworkers and Homeowners for rapid detection of moisture levels, moisture related problems, dampness and leaks in walls, floors and roofs.
 
 
 
MC-460 - Wood Moisture Meter
Wood, timber,Sawdust,Wood Chips
 
 
  • Hand-held moisture meter for quick and accurate determination of the moisture content in softwood, hardwood, other wood materials according to the resistance measuring procedure.
  • Easy and clear operation, good reading off of indicated values, low power consumption, high, long-time stability without readjustment. 
  • NEW! Polarization function for fast and accurate reading when moisture content are higher than 15%.
  • S-10 Double needle probe-wood
  • S-10P Probe, 23 cm for paper and Palm Oil tree fibers
  • S-30 Sliding hammer probe
  • S-40 Compression Chamber Sampel Cup with
  • Connection cable 1,0 m
  • Surface electrodes, veneer measuring
  • Durable plastic carrying case
 
 
 
 
MC-600SD
Moisture Meter for sawdust, Hay and Straw
 
  • Sawdust Moisture Meter MC-600SD is a state-of-the-art device for measuring moisture contents in sawdust, wood shavings, slivers and other finely crumbled wood waste.
  • It can also measure Moisture Content in Hay and Straw.
  • The Moisture Meter measures the resistance of a compressed sample.
  • The measurement is made in two stages:
  • The sample is compressed to the pressure of approx. 0.2 MPa.
  • The resistance of the sample is measured and converted into moisture contents.
  •  Fast display of measuring results.
  • Pellet (Pelletizing) and Brickette manufacturing
  • Anyone who needs a professional quality tool to control Moisture Content in Sawdust, other wood shavings as well as Straw and Hay
 
 
FMG-3000
Moisture Meter for Wood Chips
 
  • Designed to quickly determine the percentage of the moist content in wood chips.
  • The moisture determines the heat value of the fuel and thus the price to which wood chips is accounted for.
  • A moist content of about 40% in the wood chips halves the heat value.
  • Conventional methods for the determination of the moisture are very time consuming.
  • With FMG-3000 the moisture content in wood chips can be determined in a simple and quick way.
  • Great importance was put on the user-friendliness handling.
  • By simple keystroke, the percentage of the water content can be accurately read off on an LCD-display within seconds.
  • The robust construction has been designed for heavy-duty use, for example in heating plants. 
 
MC-60CPA
Paper Moisture Detector
 
  • Generation of microprocessor controlled, pocket size handheld moisture meter.  
  • Accurate, reliable and simple to use for rapid and non-destructive determination of the moisture content of paper and paperboard on rolls, stacks or reams.
  • By pressing the sensor against the paper, the moisture content will be displayed within seconds.
  • Pin-less & non-destructive: Capacitance measurement using a high frequency dielectric field
  • Select from 12 material codes for paper
  • Moisture detection down to depth of 50mm max
  • Low battery warning & Auto Power Off
  • Impact resistant ABS housing
  • Complete with 9V battery and carrying case
 
 
 
 
 
 
 
 

Moisture Indicator for wood and building materials

 
 
 
BDD "mini"
Pin-type Moisture Indicator

 

 
MC-410
Pin-type Moisture Indicator
 
MC-411
Pin-type Moisture Indicator
 
MC-420
Non destructive Moisture Indicator
 
 
 
 
MC-500
Non destructive Moisture Indicator
 
 
MC-550
Non destructive Moisture Indicator
 
 
 
 
 
 
 
 
 
 
 
 
 

The New Orion Line of Pinless Wood Moisture Meters

Hand Held Meters for Mills & Secondary Wood Manufacturers

 
 
 
 
 
Orion® 910 Deep Depth Pinless Wood Moisture Meter
 
  • Deep Depth Measurements
  • IntelliSense™ Technology
  • Fast Selection Species Settings
  • Non-Damaging Pinless Sensor
  • Virtually Unaffected by Temperature
  • On-Site Calibration
  • Relative Moisture Measurement Mode
  • Press to Hold Readings
  • Programmable Alarm
  • Ruggedized Protective Rubber Boot and Hard Case
 
 
 
 
 
Orion® 920 Shallow Depth Pinless Wood Moisture Meter
 
  • Shallow Depth Measurements
  • Fast Selection Species Settings
  • Non-Damaging Pinless Sensor
  • Virtually Unaffected by Temperature
  • On-Site Calibration
  • Relative Moisture Measurement Mode
  • Press to Hold Readings
  • Programmable Alarm
  • Ruggedized Protective Rubber Boot and Hard Case
 
 
 
Orion® 930 Dual Depth Pinless Wood Moisture Meter
 
  • Dual Depth Measurements
  • IntelliSense™ Technology
  • Fast Selection Species Settings
  • Non-Damaging Pinless Sensor
  • Virtually Unaffected by Temperature
  • On-Site Calibration
  • Relative Moisture Measurement Mode
  • Press to Hold Readings
  • Programmable Alarm
  • Ruggedized Protective Rubber Boot and Hard Case
 
 
Orion® 940 Data Collection Pinless Wood Moisture Meter
 
  • Data Collection
  • Dual Depth Measurements
  • IntelliSense™ Technology
  • Fast Selection Species Settings
  • Non-Damaging Pinless Sensor
  • Virtually Unaffected by Temperature
  • On-Site Calibration
  • Relative Moisture Measurement Mode
  • Press to Hold Readings
  • Programmable Alarm
  • Ruggedized Protective Rubber Boot and Hard Case
 
 
 
Orion® 950 Smart Pinless Wood Moisture Meter with Temperature/RH
 
  • Bluetooth® App Enabled
  • Temperature and Humidity Sensor
  • Dew Point Calculations
  • Equilibrium Moisture Content
  • Grains Per Pound/Kilogram Mode
  • Data Collection
  • Dual Depth Measurements
  • IntelliSense™ Technology
  • Fast Selection Species Settings
  • Non-Damaging Pinless Sensor
  • Virtually Unaffected by Temperature
  • On-Site Calibration
  • Relative Moisture Measurement Mode
  • Press to Hold Readings
  • Programmable Alarm
  • Ruggedized Protective Rubber Boot and Hard Case
 
 
 
 
L601-3 Handheld Moisture Meter
 
 
  • This model is available in 2 different versions: pre-calibrated for either Douglas-fir (DF) or Southern yellow pine (SYP).
  • In either case, an accompanying instruction manual includes species adjustment tables for more than a hundred of the most used hardwood, softwood, and imported species.
  • Non-invasive scanning: does not mar or damage the surface of wood being tested.
  • Low battery light: warns the user that voltage has been drained to a level where the batteries must be changed to ensure the meter functions properly.
  • The L601-3 also features an automatic shut-off (battery saver).

 
 
L620 Digital Lumber Moisture Meter
 
 
  • Storage of up to 500 individual moisture readings.
  • Readings are retained even when the batteries have been replaced.
  • The L620 is factory-supplied with 32 built-in common species.
  • Readings can be stored in up to 5 different groups for comparison of average MC, standard deviation, and minimum/maximum MC.
  • The LCD screen is backlit, making it easier for measurements to be taken in low-light environments.
  • Battery life: ~50 hours of continuous use, will be less when the backlight is turned on.
  • When the battery voltage is low, “BAT” will be displayed.
  • Auto shut-off in 1 minute unless a function button has been pressed or an MC reading has changed.
 
 
 
 
 
L622 Digital Recording Moisture Meter
 
  • Takes up to 5,000 separate moisture readings.
  • Stores readings in up to 200 easily organized groups for comparison of average moisture content, standard deviation, and minimum/maximum moisture content.
  • Built-in real-time clock/calendar.
  • Using nonvolatile memory, the L622 will retain the stored readings even when the batteries are removed or changed.
  • Battery life, ~50 hours of continuous use, will be less when backlight is turned on.
  • When the battery voltage is low, “BAT” will be displayed.
  • A ‘no-activity’ auto shut-off in 1 minute saves battery life.
  • Operating temperature 30-120 degrees F.
 
 
 
L600 Series Ruggedized Carrying Case
 
  • A very high-quality, ruggedized carrying case for our L601-3, L620, and L622 handheld moisture meters.
 
 
L722 Lumber Stack Probe Sensor
 
  • Probe hinge assembly is resistant to breakage when overstressed.
  • Metal extrusion provides durability and ruggedness for mill environments.
  • Leaf spring design ensures proper contact with the lumber for more accurate readings.
  • The springs are user replaceable if damaged.
  • Sensor Probe Head is easily detachable from the extrusion for field servicing.
  • Spare Sensor Probe Heads can be purchased separately.
  • Available in Long (L) and Short (S) lengths.
 
 
 
 
 
 

 
 

Rapid RH® and Concrete Moisture Products

 
 
 
 
 
Smart Logger™ | Bluetooth Temperature & Humidity Sensor
 
  • The Wagner Meters Smart Logger is a discrete Bluetooth temperature and humidity data logger.
  • Capable of capturing, recording, and sending up to 12,000 readings or 300 days of ambient temperature and relative humidity data for job site monitoring.
 
 
 
 
 
WFP500+ Rapid RH® 5.0 Professional Flooring Installer Kit
 
  • The WFP500+ gives the professional installer the most advanced moisture testing technology for concrete, wood, and other building materials. Includes 2 Smart Logger™ ambient temperature and humidity recorders.
 
Concrete Moisture Test Starter Kit+ with Rapid RH® 5.0
 
  • This kit includes everything you need to easily get started testing for concrete moisture using our Rapid RH® reusable sensors, along with 2 Smart Logger™ ambient temperature and humidity recorders.
 
 
Concrete Moisture Test Starter Kit+ with Rapid RH® 4.0EX
 
  • This kit includes everything you need to easily get started, including 1 Easy Reader, 5 Smart Sensors (used for relative humidity testing), and 2 Smart Logger™ ambient temperature and humidity recorders.
 
 
 
 
 
 
WFP400+ Rapid RH® 4.0EX Professional Flooring Installer Kit
 
  • The WFP400+ provides everything you need for accurate moisture testing of concrete, wood, or other building materials.
  • Includes 2 Smart Logger™ ambient temperature and humidity recorders.
 
 
WFP200+ Rapid RH® 4.0EX Advanced Concrete Moisture Test Kit
 
  • The WFP200+ combines accurate moisture testing using the Rapid RH® 4.0 EX, wireless data transfer with the Bluetooth® Smart Reader, plus 2 Smart Logger ambient temperature and humidity recorders.
 
 
Rapid RH® 5.0 EasyCare CalCheck® (with 75% RH) – 5 Pack
 
  • PTFE filter protection from harmful vapors
  • Integrated, constant, pure 75% RH sensor storage
  • On-demand accuracy verification
  • Regular tap water for recharging RH generator
  • Inherent tap-water-to-distilled-water conversion technology
 
 
 
 
 
Smart Sensor Replacements for the Rapid RH® 5.0 Reusable
 
  • Stay within the ASTM F2170 Standard of calibration with replacement reusable Smart Sensors for your Rapid RH® 5.0 Reusable Smart Sensor Kit.
  • We have you covered with 5-packs all the way up to packs of 100.
 
Rapid RH® 5.0 Base Packs
 
 
  • With extra bases, you're always ready to reuse your Rapid RH® 5.0 Reusable Smart Sensors.
 
 
Rapid RH® 5.0 Smart Sensor Sleeve Packs
 
  • Keep plenty of extra packs of Reusable Smart Sensor sleeves on hand so you always have what the job requires.
 
 
 
 
 
Rapid RH® 5.0 Sleeve Removal Tool
 
 
  • The Rapid RH® 5.0 extraction tool is designed specifically for your Rapid RH® 5.0 Reusable Smart Sensors.
 
 
 
Rapid RH® 5.0 Sensor Extraction Tool
 
  • This tool will remove the 5.0 Smart Sensor, without removing the sleeve from test hole.
 
 
Rapid RH® 5.0 Carrying Case (Large)
 
  • Holds all the Reusable Smart Sensors, sleeves, bases, and various tools and parts that come with the Rapid RH® WFP500 Reusable Pro Flooring Installer Package.
 
 
 
 
 
Rapid RH® 5.0 Carrying Case (Small)
 
  • Holds all the Reusable Smart Sensors, sleeves, bases, and various tools and parts that come with the Rapid RH® Reusable Complete Starter Kit.
 
 
Rapid RH® Carrying Case
 
 
  • It seems only fitting that the Rapid RH® Carrying Case should be as resilient as concrete.
 
 
Smart Sensor 5 Pack with Easy Reader for Rapid RH® 4.0EX
 
  • 5 Rapid RH® 4.0EX Smart Sensors and 1 Easy Reader. The Rapid RH® 4.0 EX Smart Sensors are factory calibrated using CMOSens™ technology. Each Smart Sensor pack comes with a NIST traceable calibration certificate.
 
 
 
 
 
Smart Sensor 5 Pack for Rapid RH® 4.0EX
 
  • If you already have our Rapid RH® 4.0 Easy Reader and just need a few more sensors, the Smart Sensor 5 pack is for you.
 
 
Smart Sensor Value Pack Replacement for Rapid RH® 4.0EX
 
  • Need Smart Sensors in bulk? Choose from packs of 25, 50, and 100 Smart Sensors.
 
 
Rapid RH® 4.0 EX Additional Extensions
 
  • Package of 10 extensions.
 
 
 
 
 
 
 
 
 
Rapid RH® Protective Orange Caps
 
 
  • One bag of 10 Rapid RH® Protective Orange Caps.
 
 
Rapid RH® Easy Reader
 
 
  • The removable Rapid RH® Easy Reader with our patented Touch-n-Sense™ technology allows you to take repeated readings from any Smart Sensor quickly and easily.
 
 
Rapid RH® Bluetooth® Smart Reader
 
  • With this versatile wireless device, you’re set for quick, accurate readings of relative humidity (RH) and temperature no matter which Rapid RH® system you use.
 
 
Hilti One-Step Vacuum + Drill Bit
 
  • Diameter: 3/4″
  • Working Length: 9-7/16″ (240 mm)
  • Compatible with 1 ¼” vacuum hose
  • One-step drilling and cleaning
  • Optimum hole cleaning for consistent anchor setting
  • No need for spiral blades up the side to bring debris to the surface
  • Contains carbide tips that last longer than other types of drill bits
  • Robustness, lifetime, and drilling speed equal to TE-CX drill bits
  • Minimized snagging or sticking when drilling
 
 
 
 
 
Rapid RH® Digital pH Meter
 
  • Easy-to-use dual-slope three-point automatic calibration with manual temperature compensation
  • Automatic electrode slope percentage display after calibration
  • Synchronous LCD display that shows both the pH and temperature of the solution
  • Low voltage display and 15-minute idle automatic shutdown
  • Selectable Celsius (°C) or Fahrenheit (°F) display
  • A portable case with room for calibration buffer solutions
 
Infrared Thermometer
 
  • For building inspectors as well as finished flooring and coating contractors, Wagner Meters’ Infrared Thermometer adds immediate and vital information for building inspections and flooring installations.
 
 
 
 
 
 
SDS Masonry Drill Bit
 
  • Four premium-grade carbide inserts
  • Newly-patented technology tip for expedient, durable, smooth drilling
  • Easy-start center point
  • Ultra-efficient dust removal flute design
 
 
Smart Sensor Insertion Tool
 
  • The Rapid RH® 4.0 EX Insertion Tool is newly designed to provide simpler, more ergonomic Smart Sensor insertion for relative humidity (RH) testing in concrete slabs with the Rapid RH® test method.
 
 
Vacuum Attachment
 
  • Designed specifically for removing concrete debris before installing the Rapid RH® 4.0 and 5.0 Smart Sensors.
 
 
 
 
Wire Cleaning Brush
 
  • The Cleaning Brush was designed specifically for removing concrete debris before installing the Rapid RH® 4.0 Smart Sensors.
 
 
 
 
 
pH Test Kit
 
  • Test the pH of your concrete slabs with this convenient pH Test kit that includes test strips and a 2 oz. bottle of distilled water.
 
 
 
 
 
TH-200 Thermo-Hygrometer
 
  • Measure temperature (F or C), relative humidity, and dew point before, during, and after your flooring installation and woodworking applications.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Ancor Sdn Bhd
D-2-4, Setiawalk, Pusat Bandar Puchong, 47160 Puchong, Selangor, Malaysia
Tel: +6012-921 3877; +6018-623 5135,
Fax: 6018-635 1593  
Email: info@ancor.com.my ; ancor.my@gmail.com