ANCOR SDN BHD
Tel: +6012-921 3877 ;
       +603-58797121
Email: info@ancor.com.my ;
           ancor.my@gmail.com
D-2-4, Setia Walk,
Pusat Bandar Puchong,
47160 Puchong, Selangor
   Home      Davis- Weather Monitoring      Accessories
        
 
 
 
 

ACCESSORIES

 
 
 
 
 
 
Anemometer for Vantage Pro2™ & EnviroMonitor®
 
  • Rugged components stand up to hurricane-force winds, yet are sensitive to the lightest breeze.
  • Includes both wind speed and wind direction sensors, mounting hardware, and 40 ft. (12 m) cable
 
 
 
Power Assembly for Rain Collector Heater
 
  • Replacement power assembly for Rain Collector Heater
 
 
 
Front Cover for Daytime FARS Kit
 
 
  • Replacement front cover for shelter housing for Daytime Fan Aspirated Radiation Shield Kit for Vantage Pro2.
  • Includes two solar panels for the Daytime Fan Aspirated Radiation Shield.
 
 
 
Standard Motor Kit for Fan-Aspirated Radiation Shield
 
 
  • Replacement motor kit for all fan-aspirated radiation shields.
 
 
Tipping Bucket Assembly for 0.01″ rain collector
 
 
  • Replacement tipping bucket assembly for Weather Wizard III and Weather Monitor II
 
 
 
Tipping Bucket Assembly for Weather Wizard and Weather Monitor 0.2 mm rain collector
 
  • Replacement tipping bucket assembly for Weather Wizard III and Weather Monitor II.
 
 
Front Cover for Shelter Housing
 
  • Replacement front cover for shelter housing, with solar panel, for wireless Vantage Pro2 and Vantage Pro2 Plus Integrated Sensor Suites.
 
 
Shelter Angle Brackets
 
  • Change the solar panel’s angle from 5° to 30°. Increase solar panel’s efficiency at lower latitudes.
  • Includes mounting hardware.
  • For use with Vantage Connect, EnviroMonitor Gateway or Solar Power Charging kits.
 
 
 
Penta Band Cell Antena
 
  • Replacement penta band cell antenna for EnviroMonitor Gateway and Vantage Connect.
 
 
Universal Mounting Bracket – UV/Solar Radiation/Humidity
 
  • For mounting a solar radiation sensor, a UV sensor, or a radiation shield. Bracket is pre-driller for easy mounting.
  • Includes mounting hardware.
 
 
 
Power Adapter for Vantage Family Consoles
 
  • Replacement power adapter for Vantage Pro, Vantage Pro2, and Vantage Vue consoles.
 
 
Rain Collector Base
 
 
  • Replacement base for rain collector cones in all wireless and cabled Vantage Pro2 stations.
  • Does not include tipping bucket assembly.
 
 
Rain Spoon Assembly for Vantage Vue Sensor Suite (0.01 inch)
 
  • Replacement rain spoon assembly, 0.01 inch, for the Vantage Vue sensor suites.
 
 
Rain Spoon Assembly for Vantage Vue Sensor Suite (0.2 mm)
 
  • Replacement rain spoon assembly, 0.2 mm, for the Vantage Vue integrated sensor suite.
 
 
Vantage Pro/Pro2 Console Rear Assembly
 
  • Replacement rear cover for Vantage Pro2 and original Vantage Pro consoles.
  • This is the entire back side of the case, including the battery door and easel stand.
 
 
 
Front Cover for Shelter Housing W/O Solar Panel
 
 
  • Replacement front cover for shelter housing, without solar panel, for cabled Vantage Pro2 integrated sensor suites.
 
 
Vantage Pro2™, Monitor II, and Wizard III Wind Cups (Anemometers 2003 and later)
 
  • Replacement wind cups for Vantage Pro2, Weather Monitor II, and Weather Wizard III manufactured after Spring of 2003.
 
 
 
Wind Cups for Vantage Vue ISS
 
 
 
  • Replacement wind cups for Vantage Vue integrated sensor suite.
 
 
Wind Vane (D-shaped receptacle)
 
 
  • Replacement wind vane with brass tip for Vantage Pro2 anemometers with D-shaped shafts.
 
 
Wind Vane (D-shaped receptacle) with Davis Logo
 
  • Replacement wind vane with brass tip and logo for Vantage Pro2 anemometers with D-shaped shafts.
 
 
Wind Vane (round receptacle)
 
 
  • Replacement wind vane with brass tip for Vantage Pro2 anemometers with round shafts.
 
 
 
Wind Vane for Vantage Vue ISS
 
 
 
  • Replacement wind vane for Vantage Vue integrated sensor suite.
 
 
Vantage Pro, Monitor II, and Wizard III Wind Cups (Anemometers 2003 and earlier)
 
  • Replacement large wind cups for Vantage Pro, Weather Monitor II, and Weather Wizard III manufactured before Spring of 2003.
 
 
 
9-Pin Adapter for Serial Port WeatherLink®
 
 
  • 9-pin adapter for serial port versions of WeatherLink for Vantage stations.
 
 
Bird Spike/Debris Screen Kit
 
 
  • Replacement debris filter for Vantage Pro and Vantage Pro2 rain cones with grip grooves.
 
 
Kickstand Arm for Vantage Pro2 Consoles
 
  • Replacement hinge arm for kickstand on Vantage Pro2 and original Vantage Pro consoles. Does not include kickstand or back cover. For full assemply, see the Rear Assembly (#07345.599) for Vantage Pro and Vantage Pro2.
 
 
 
Kickstand for Vantage Pro Consoles
 
 
  • Replacement kickstand for Vantage Pro2 and original Vantage Pro consoles.
 
 
Retainer Clip for Shelter Housing
 
  • Replacement retainer clip for back shelter housing on cabled and wireless Vantage Pro2 integrated sensor suites.
 
 
 
Tipping Bucket (Aluminum-plated)
 
  • Replacement tipping bucket for rain collector cones in all wireless and cabled Vantage Pro2
 
 
Anemometer Arm
 
  • Replacement anemometer arm for wireless or cabled Vantage Pro2 or Vantage Pro anemometers.
 
 
Anemometer Mounting Base
 
 
 
  • Replacement anemometer mounting base (black) for all Vantage Pro2 anemometers.
 
 
Anemometer Mounting Base for Weather Wizard and Weather Monitor
 
  • Replacement anemometer mounting base for Weather Wizard III and Weather Monitor II.
 
 
 
Insulating Blanket for Rain Collector Heater
 
 
  • Replacement insulating blanket for Rain Collector Heater.
 
 
USB Cable for USB WeatherLink®
 
 
  • Replacement USB cable for USB-port versions of WeatherLink for Vantage stations.
 
 
Battery Door for Vantage Pro2™ & Vantage Pro® Console
 
  • Replacement battery door for all Vantage Pro2 and Vantage Pro consoles.
 
 
Reed Switch Cover for Tipping Bucket
 
  • Replacement reed switch cover for rain collector tipping bucket in all wireless and cabled Vantage Pro2, original Vantage Pro, Weather Wizard II, and Weather Monitor II stations.
 
 
 
Reed Switch for Tipping Bucket
 
 
  • Replacement reed switch for rain collector tipping bucket in all wireless and cabled Vantage Pro2, Vantage Pro, Weather Wizard II, and Weather Monitor II stations.
 
 
 
Battery Door for Vantage Vue Console/Receiver
 
  • Replacement battery door for the Vantage Vue console/receiver.
 
 
Bubble Level for Vantage Vue ISS
 
 
  • Replacement bubble level for the Vantage Vue integrated sensor suite.
 
 
Captive Thumb Screw for Vantage Vue ISS
 
  • Replacement captive thumb screw for the Vantage Vue integrated sensor suite
 
 
Debris Screen for Vantage Vue Rain Collector
 
  • Replacement debris screen for Vantage Vue sensor suite rain collectors.
 
 
 
Kickstand for Vantage Vue Console/Receiver
 
  • Replacement kickstand for the Vantage Vue console/receiver.
 
 
Magnet End Cap for Tipping Bucket
 
  • Replacement magnet end cap for tipping bucket for rain collector cones in all wireless and cabled Vantage Pro2
 
 
 
Retainer for Antenna Grommet
 
  • Replacement retainer for antenna grommet in back shelter housing.
 
 
Rubber Feet for Kickstand
 
  • Replacement rubber feet for kickstand on Vantage Pro2 and original Vantage Pro consoles.
  • Use two per console.
 
 
 
 
 
 
 
 
 
 

 
Ancor Sdn Bhd
D-2-4, Setiawalk, Pusat Bandar Puchong, 47160 Puchong, Selangor, Malaysia
Tel: +6012-921 3877; +6018-623 5135,
Fax: 6018-635 1593  
Email: info@ancor.com.my ; ancor.my@gmail.com