ANCOR SDN BHD
Tel: +6012-921 3877 ;
       +603-58797121
Fax:+6018-635 1593
Email: info@ancor.com.my ;
           ancor.my@gmail.com
D-2-4, Setia Walk,
Pusat Bandar Puchong,
47160 Puchong, Selangor
   Home      Omega Instruments      Valve
 
 
 
 
 

General Purpose Solenoid Valves


Direct-acting valves ideal for neutral media such as compressed air, inert gases, water, and synthetic oils and more.
 
 
FSV30 Series
 
Pilot Operated Niploy Solenoid Valves
 
 
  • Media: Gases, Select Corrosive
    and Non-Corrosive Liquids, Vacuum to 28" Hg
  • Normally Closed or Normally Open
  • ¼" to 2" Size
  • Rated up to 129°C (265°F)
 
FSV-40
 
2-way Pilot Operated Solenoid Valve for Water, Hydraulic Oil and Air
 
  • 100% Duty Cycle for Normally Closed Valves
  • Low Lead Brass Body
  • ¼ to 2" Sizes
  • Available Normally Closed or Normally Ope
 
SV170
 
OMEGA-FLO 2-Way 316 Stainless Steel Solenoid Valve
 
  • Stainless Steel Solenoid Valve
  • Lead Free
  • Normally Closed
  • Ideal for Hot Water and Steam
  • 8 W, AC Coils Standard Up to 1"
  • 14 W, DC Coils Standard on Larger Units
 
SV100-SV200
 
General Purpose 2-Way Solenoid Valves - NEMA-4, Stainless Steel and Brass
 
  • Available Stainless Steel Valve Body Resists Corrosion
  • NEMA-4 (IP65) Housing Standard
  • Mounts in Any Position
  • Rated for Continuous Duty
  • High Pressure Models
 
SV220, SV230, SV240, SV250,
SV260, SV270, SV280 and SV290
 
Special Purpose Solenoid Valves for Steam, Hot Water,
Anti-water Hammer, 3-way, 4-way and Selectable Service
 
  • 3-WAY CONTROL
    A three-way valve is normally used to control larger flows; it has an inlet port,
  • 4-WAY CONTROL
    to control double-acting actuators. 
 
SV3100 Series
 
2-Way Direct Acting Solenoid Valves
 
 
  • Ideal for Compressed Air, Inert Gas, Water, and Synthetic Oils
  • Normally Closed
  • Process Temperature to 137°C (280°F)
  • 8 W AC Coils Standard
  • Optional 12 Vdc, 24 Vdc, 24 Vac, 220-240 Vac Coils Available
 
SV3200 Series
 
Solenoid Valves General Purpose
 
 
  • SV3200 Series 2-way solenoid valves are direct-acting valves featuring stainless steel construction and PTFE seal material.
  • The temperature range of -40 to 182°C (-40 to 360°F) is ideal for neutral media such as compressed air, inert gases, water, and synthetic oils. 
 
 
SV3300 Series
 
OMEGA-FLO® 2-Way General Purpose Solenoid Valves
 
  • Ideal for Compressed Air, Inert Gas, Water and Synthetic Oils
  • Available in Normally Open or Normally Closed
  • Process Temperature to 137°C (280°F)
  • 120 Vac Standard (DC Coils are Optional)
  • All Coils are CE
 
SV3321
 
OMEGA-FLO 2-WAY HIGH PRESSURE SOLENOID Valves
 
  • Ideal for Compressed Air, Inert Gas, Water and Synthetic Oils
  • Maximum Pressure 1450 psi (100 bar)
  • Process Temperature to 182°C (360°F)
  • 8 W, AC Coils Standard, 12 Coil Available
 
SV3500 Series
 
OMEGA-FLO® 2-Way Zero Differential Solenoid Valves
 
 
  • Normally Closed
  • Ideal for Compressed Air, Inert Gas, and Water
  • Process Temperature to 90.5ºC (195ºF)
  • 120 Vac Standard (220 Vac and DC Coils are Optional and field installed)
  • All Coils are CE
 
SV4000A Series
 
2-Way Solenoid Valves - For Hot Water and Steam
 
 
  • Mounting Position: Any (preferably with solenoid system upright)
  • Max Process Temp: 60 to 182°C (140 to 360°F) PTFE O-ring
  • Max Ambient Temp: Coil dependent (see ratings on coils)
  • Voltage Tolerance: ±10% AC, ±5% DC
 
SV4100 and SV4300 Series
 
OMEGA-FLO® 3-Way Direct Acting Solenoid Valves
  • Ideal for Compressed Air, Inert gas, Water and Synthetic Oils
  • 120 Vac Standard (220 Vac and DC Coils are Optional)
  • All Coils are CE
  • Normally Open or Normally Closed Models
 
SV6000 Series
 
OMEGA-FLO® 2-Way Solenoid Valves
 
  • Normally Closed or Normally Open
  • Ideal for Compressed Air, Inert Gas, Synthetic Oils and Water
  • 120 Vac Standard (220 Vac and DC Coils are Optional)
  • All Coils are CE
 
SV6100A Series
 
LEAD-FREE BRASS 2-Way Solenoid Valves
 
  • NSF61-G Approved Materials
  • Normally Closed
  • Ideal for Compressed Air, Inert Gas, Synthetic Oils and Water
  • 120 Vac Standard (220 Vac and DC Coils are Optional)
  • 8 W, AC Coils
 
SV6100 Series
 
Brass 2-Way Solenoid Valves
 
  • Normally Closed
  • Ideal for Compressed Air, Inert Gas, Synthetic Oils and Water
  • 120 Vac Standard (220 Vac and DC Coils are Optional)
  • 8 W, AC Coils Standard
  • 12 or 14 W, AC or dc Coils Available For Many Models
 
SVH-110
 
High Pressure Solenoid Valve
 
  • Stainless Steel Construction
  • NEMA 4 and 7
  • Pressures up to 10,000 psi (Depending on Model)
  • Connection: ½ NPT, 457 mm (18") leads
  • Valve Body: 316 SS
 
SVH-120
 
HIGH PRESSURE SOLENOID VALVE
 
  • Stainless Steel Construction
  • ¼ or ½" Ports
  • Pressures up to 10,000 psi (Depending on Model)
  • ideal for flow control of high pressure air, water, compressed natural gas (CNG), hydrogen, nitrogen, and other gases or light liquids compatible with the materials of construction
 
SVH-140
 
HIGH PRESSURE SOLENOID VALVE
 
  • Stainless Steel Body
  • Models for Gas or Liquid
  • ½ to 2" Ports
  • Pressures up to 1500 psi (Depending on Model)
  • for cryogenic conditions and applications that need to control higher pressures
 
V60 Series In-Line
 
Pneumatic Directional Control Valves
Pneumatic Directional Control Valves, 2-way, 3-way or 4-way air or solenoid operated.
 
  • Valve Type: 3-Port/2-Position, 5-Port/2-Position, and Modular Fixed Length Manifold 2 x 3/2
  • Low Power Consumption with 24 Vdc Operation
  • Individual or Manifold System with Easy Assembly
  • High Flow Rate
 
 

Ball Valves

Ideal where tight-shut-offs are required, available for a variety of pressure ranges.
 
 
 
BV70 Series
 
Tube Compression Bar Stock Ball Valves 1/4 to 1"
 
  • Two Ferrule Compression Fittings for Positive and Repeatable Two-Point Sealing
  • Self Compensating Valve Stem Seal Design Ensures Long, Leak-Tight Maintenance Free Service
  • Assembled Clean and Without Lubricants to Minimize the Possibility of System Contamination

 
BV80 Series
 
Lever Handle Ball Valves
 
 
  • Self Compensating Valve Stem Seal Design Ensures Long, Leak-Tight Maintenance Free Service
  • Full Thread Length Compliance with ANSI B1.20.1 Specification Allows More Flexibility in L1 (hand) and L3 (wrench) Pipe Makeup for Handle Orientation and or Positive Sealing with Lesser Quality Mating Pipe Threads
 
BVP80 Series
 
Ball Valves, Pneumatic and Electric Actuated Models
 
  • Compact Size and Lightweight Construction
  • Reliable, Long Lasting Performance
  • Standard “In Line” or “Cross Mount” Valve to Actuator Configurations
  • Manual Override Standard
  • Electric Actuators Feature Two 1/2 NPT Conduit Ports and Integral Thermal Overload Protect
 
 

Air Operated Diaphragm Valves

Air-operated angle seat valves are available for use almost any fluid type.
 
 
AAV-1000
 
Air-Actuated Valve, Bronze, Normally Closed
 
 
  • Ideal Alternative to Complex Actuated Ball Valves
  • Ideal for Neutral and Some Aggressive Fluids
  • Optical Position Indication Standard
  • Bronze and PTFE Wetted Parts
 
AAV-1000B
 
Air-Actuated Valve, Bronze, Normally Closed, Bi-Directional
 
  • Media Temperature: -10 to 180°C (14 to 360°F)
  • Ambient Temperature: -10 to 60ºC (14 to 140ºF)
  • Pilot Media: Air, inert gases, water, maximum 60°C (140°F)
  • Valve Position: Normally closed
 
 
AAV-1000C
 
Air-Actuated Valve, Bronze, Normally Closed, Compact Design
 
  • Media Temperature: -10 to 180°C (14 to 360°F)
  • Ambient Temperature: -10 to 60ºC (14 to 140ºF)
  • Body Material: Bronze
  • Seal Material: PTFE
  • Pilot Media: Air, inert gases, water, maximum 60°C (140°F)
  • Valve Position: Normally closed
 
AAV-1000CB_
 
Air-Actuated Valve, Bronze, Normally Closed, Bi-Directional, Compact Design
  •  Media Temperature: -10 to 180°C (14 to 360°F)
  • Ambient Temperature: -10 to 60ºC (14 to 140ºF)
  • Pilot Media: Air, inert gases, water, maximum 60°C (140°F)
  • Valve Position: Normally closed
  • Flow Direction: Bi-directional
     
    AAV-1100
     
    Air-Actuated Valve, 316L Stainless Steel, Normally Closed
     
    • Media Temperature: -10 to 180°C (14 to 360°F)
    • Ambient Temperature: -10 to 60ºC (14 to 140ºF)
    • Body Material: Stainless steel AISI 316L
    • Seal Material: PTFE
    • Pilot Media: Air, inert gases, water, maximum 60°C (140°F)
    • Valve Position: Normally closed
     
     
    AAV-1100B
     
    Air-Actuated Valve, Stainless Steel 316L, Normally Closed, Bi-Directional
    •  Media Temperature: -10 to 180°C (14 to 360°F)
    • Ambient Temperature: -10 to 60ºC (14 to 140ºF)
    • Body Material: Stainless Steel AISI 316L
    • Pilot Media: Air, inert gases, water, maximum 60°C (140°F)
    • Valve Position: Normally closed
    • Flow Direction:
     
    AAV-1100C
    _
    Air-Actuated Valve, Stainless Steel 316L, Normally Closed, Compact Design
    • Ideal for Neutral and Some Aggressive Fluids
    • Optical Position Indication Standard
    • Compact Design
    • 316L Stainless and PTFE Wetted Parts
    • For Water, Steam, Compressed Air, Natural Gas, Oil or Vacuum Service
     
    AAV-1100CB
     
    Air-Actuated Valve, Stainless Steel 316L, Normally Closed Bi-Directional, Compact Design
    • Ideal Alternative to Complex Actuated Ball Valves
    • Optical Position Indication Standard
    • Compact Design for Bi-Directional Flow
    • 316L Stainless and PTFE Wetted Parts
     
    FSV-2100
     
    2-way Air Operated Angle Seat Valves
     
    • Optical Position Indication Standard
    • Cost Effective High Cycle Life
    • 316L Stainless Steel Body, PTFE Seal
    • Floating Seal and Self-Aligning Gland
    • For Water, Steam, Compressed Air, Natural Gas, Oil and Vacuum Service
     
     
     
     
     
     
     
     
     
     
     
     
    Ancor Sdn Bhd
    D-2-4, Setiawalk, Pusat Bandar Puchong, 47160 Puchong, Selangor, Malaysia
    Tel: +6012-921 3877; +6018-623 5135,
    Fax: 6018-635 1593  
    Email: info@ancor.com.my ; ancor.my@gmail.com