Valves

This category contains the different types of valves. These different types are Angle Seat, Ball, Butterfly, Check, Diaphragm, Globe, Manifold, Needle, Shuttle, Solenoid, and Zone Valves.

Needle

Needle valves are manual linear motion valves for precise flow control in low flow, small pipe applications. Models provide excellent performance and reliability. They have a tamper-proof design and blowout-proof stem. A few models are designed to be used in pressure or non-critical vacuum applications.

Series NVII Needle Valve

Economical, Pressures Up to 2000 psi, Blowout-Proof Stem

Pressures to 2000 psi
One piece body construction
Tamper proof design and blowout-proof stem

Series HNV Needle Valve 1-Valve Block Manifolds

For Use with Gas and Liquids, Pressures Up to 6000 psi

is a barstock style needle valve that is designed for isolating instruments from liquids or gases.
The valve series features fine threading and large seat area to ensure tight shutoff.

Model TNV PTFE Needle Valve

All PTFE and PCTFE Wetted Parts

designed for laboratory and industrial applications for regulating corrosive gases and liquids for high purity services.
Media only come in contact with PTFE and PCTFE.

Check

Check valves are back flow prevention valves. There are in-line and flap models. They are economical and used for both commercial and industrial application. A few models are designed with a smooth flow profile to minimize head loss and accumulation of debris.

Series BICV Brass Inline Check Valve

Economical, Spring-Loaded for Fast Seating

Soft seat for bubble-tight shut off
Spring loaded for rapid reseating at high and low temperatures
Patented guided-disc technology

Series BFC Brass Flap Check Valve

Economical, Compact, Backflow Protection

Quality brass body and stem construction allow for long service life and reliability.
Ideal where backflow could potentially cause damage to equipment by yielding reverse flow.
Pressure in the line moves the flap off of the seat, opening the valve

Manifold

Manifold valves are manual block and bleed manifold valves for pressure instruments. Suited to control oil, water, toxic fluids, chemicals, air, and steam. Flanged models are designed to mount to an industrial differential pressure transmitter. Applications include oil refineries, nuclear power stations, petrochemical processing and more.

Series BBV-1 3-Valve Block Manifold

Stainless Steel Body, NPT Connections

The Series BBV-1 body is forged from 316 stainless steel bar stock and designed to withstand repeated open and close operations.
Suited to control oil, water, toxic fluids, chemicals, air, and steam; the 3-valve block manifold has (2) isolate and (1) equalizing valves.

Series BBV-2 5-Valve Block and Bleed Manifold

Stainless Steel Body, NPT Connections

ideal for use over a broad range of industrial applications including oil refineries, nuclear power stations, petrochemical processing, and more.
The Series BBV-2 body is forged from 316 stainless steel bar stock and designed to withstand repeated open and close operations.

Series BBV-0 2-Valve Block Manifold

Stainless Steel Body, NPT Connections

6000 psi pressure limit
316 SS body, stem and valve assembly
PTFE stem packing

Ball Automated

Ball Valves are quarter-turn ball valves available in manual, electric, or pneumatic actuators. The materials they are made from include brass, stainless steel, and plastic models. Applications include heating systems, water treatment, and gas or liquid flow control. Ball valves are available in a wide variety of sizes for versatile application.

Series 3PBV Automated Ball Valve, Three-Way Plastic Electric and Pneumatic Actuators Available with a variety of electric and pneumatic actuators Field selectable socket or NPT connections	Series PBV Automated Ball Valve - Two-Way Plastic Electric and Pneumatic Actuators Shear proof stem All plastic construction	Series 3HBAV Three-Way Detachable Electric Ball Valve Floating or Modulating, Position Indicator Manual override Detachable actuator High Cv values
Series HBAV Two-Way Detachable Electric Ball Valve Floating or Modulating, Position Indicator Manual override Detachable actuator High Cv values	Series WE01 2-Piece NPT Stainless Steel Ball Valve Full Port, Vented Ball, Electric or Pneumatic Actuators Capable of being configured to fit any application Double acting or spring return anodized aluminum pneumatic actuators Full port design reduces the pressure drop across the valve	Series WE02 3-Piece NPT Stainless Steel Ball Valve Full Port, Vented Ball, Electric or Pneumatic Actuators Capable of being configured to fit any application Limit switches can be mounted to manual valves for remote monitoring 3-piece design for each replacement of seals Full port design reduces the pressure drop across the valve
Series WE03 3-Piece Tri-Clamp Stainless Steel Ball Valve Cavity Filled, Full Port, Electric or Pneumatic Actuators Capable of being configured to fit any application Limit switches can be mounted to manual valves for remote monitoring Cavity filled valve for sanitary applications	Series WE04 2-Piece Flanged Stainless Steel Ball Valve 150# ANSI Flange, Vented Ball, Electric or Pneumatic Actuators Double acting or spring return anodized aluminum pneumatic actuators Eliminates threads and reduces installation and maintenance time Full port design reduces the pressure drop across the valve	Series WE31 3-Way NPT Stainless Steel Ball Valve Full Port, Vented Ball, Electric or Pneumatic Actuators Weatherproof or explosion-proof electric actuators Double acting or spring return anodized aluminum pneumatic actuators Full port design reduces the pressure drop across the valve
Series WE33 3-Way Tri-Clamp Stainless Steel Ball Valve Cavity Filled, Electric and Pneumatic Actuators Capable of being configured to fit any application Limit switches can be mounted to manual valves for remote monitoring Cavity filled valve for sanitary applications Weatherproof or explosion-proof electric actuators	Series WE34 3-Way Flanged Stainless Steel Ball Valve 150# ANSI Flange, Vented Ball, Electric or Pneumatic Actuators Weatherproof or explosion-proof electric actuators Double acting or spring return anodized aluminum pneumatic actuators Full port design reduces the pressure drop across the valve Eliminates threads and reduces installation and maintenance time	Series ACT Pneumatic and Electric Actuators Actuators for Valve and Damper Automation ISO 5211 Mounting configuration for easy installation Pneumatic actuators offer corrosion resistance anodized finish NAMUR mounting configuration on pneumatic actuators Two-position electric actuators include auxiliary limit switches Modulating electric actuators offer an output for position monitoring
Series WE05 3-Piece Socket Weld Stainless Steel Ball Valve Full Port, Vented Ball, Electric or Pneumatic Actuators Socket weld ends Capable of being configured to fit any application Limit switches can be mounted to manual valves for remote monitoring Available with a variety of electric and pneumatic actuators	Series WE06 3-Piece NPT Stainless Steel V-Ball Valve V-Port, Vented Ball, Electric or Pneumatic Actuators The 60° and 90° balls offer an equal percentage flow characteristic Limit switches can be mounted to manual valves for remote monitoring Available with a variety of electric and pneumatic actuators	Series WE07 2-Piece Flanged Stainless Steel V-Ball Valve 150# ANSI Flange, V-Ball, Electric or Pneumatic Actuators The 60° and 90° balls offer an equal percentage flow characteristic Bubble tight shut off at high pressure drops Limit switches can be mounted to manual valves for remote monitoring Available with a variety of electric and pneumatic actuators
Series WE08 2-Piece NPT Brass Ball Valve Full Port, Vented Ball, Electric or Pneumatic Actuators Capable of being configured to fit any application Limit switches can be mounted to manual valves for remote monitoring Vented ball to reduce operating torque Weatherproof or explosion-proof electric actuators	Series WE35 3-Way NPT Brass Ball Valve Full Port, Electric or Pneumatic Actuators Capable of being configured to fit any application Limit switches can be mounted to manual valves for remote monitoring Weatherproof or explosion-proof electric actuators Double acting or spring return anodized aluminum pneumatic actuators

Manual Ball Valve

Series MV Mini Brass Ball Valve Economical, Compact Design Bubble tight shut off Economical Valve can be operated in both directions	Series BV2M Two-Piece Stainless Steel Ball Valve Full Port, 1000 psig (69 bar) Wide chemical compatibility Bubble tight shut off to 1000 psig Blowout-proof stem Actuator mounting pad	Series MSV Compact Two Way Ball Valve Blowout-proof Ball & Stem The micro finished ball and PTFE seats ensure quality seal and easy operation. The straight through flow path design allows for minimal pressure drop.
Series 3MSV Compact 3-Way Ball Valve 3-Way Blow-Out-Proof Ball & Stem Control of fluid in instrumentation and process systems. The micro finished ball and PTFE seats ensure quality seal and easy operation.	Series HBV Hastelloy® C Ball Valve Corrosion Resistant, Full Port ISO 5211 direct mounting pad Blow-out-proof stem Lockout capability High-cycle, live loaded stem packing NI-Alloy C (similar to Hastelloy® C)	Series UBV Uni-Flanged Ball Valve Forged Brass Construction, Economical, 600 psi (41 bar) Economical Unibody construction PTFE ball seats
Series DBV Brass Ball Valve Full Port, Economical, 600 psi (41 bar) Low cost Blowout-proof stem	Series SMV2 Mini Stainless Steel Ball Valve Economical, Wide Chemical Compatibility, Compact High working pressure Abrasion resistant Easy to install Economical Wide chemical compatibility	Series DBVL & SWBV NPT Brass Ball Valves Economical, Easy to Install Low lead brass PTFE seats to stem Blowout-proof stem

Solenoid

Solenoid valves are electric actuated on-off valves. They have a compact design. Some models are immune to mounting orientation. Compatible with a wide range of gases and liquids. Applications include flow control, water, process control, and chemical mixing.

Series PV Solenoid Pilot Valve Low Cost, Compact Design, For Use with SAV Angle Seat Valves	Series SVP Proportioning Solenoid Valve Low Cost, Stainless Steel Construction, 0-24 VDC Input	Series RSV Pilot Solenoid Valve Filtered and oil-free Weatherproof enclosure package available Can be mounted with DCT timer boards in one enclosure, consult factory
Series SVE Solenoid Valve Enclosures Weatherproof enclosure Can order pre-wired to terminal block Available in 6 or 12 valve size	Series SRC Solenoid Replacement Coils Field replaceable	Series SBSV-B Brass Solenoid Valves Can be oriented in any position Compact design Field replaceable coils
Series SBSV-S SS Solenoid Valves – 2-Way Guided NC Can be oriented in any position Compact design Field replaceable coils	Series SSV-B Brass Solenoid Valves – 2-Way Guided NO Can be oriented in any position Compact design Field replaceable coils	Series SSV-S SS Solenoid Valves – 2-Way Guided NO Can be oriented in any position Compact design Field replaceable coils
	Series SN NAMUR Mount Solenoid Valve NAMUR mount means the solenoid can be mounted directly to valve actuators. Designed for double acting or spring return actuators. 100% continuous duty rating. Manual override.

Strainer

Strainer valves provide excellent filtration to help prevent damage to valves, meters, etc. from rust and dirt, without sacrificing high flow characteristics. They are cost effective and high flow valves. Strainer valves have two options of materials: Brass and stainless steel. Manufactured for industrial applications.

Series BYS Brass Y-Strainers

Cost Effective, Excellent Filtration,

High Flow

Cost effective
Stainless steel strainer

Series SYS Stainless Steel Y-Strainer

Wide Chemical Compatibility,

Excellent Filtration, High Flow

Wide Chemical Compatibility,
Excellent Filtration,
High Flow

Angle Seat

Angle Seat Valves are linear motion on-off valves. They are pneumatic actuated, low cost, and compact. Applications vary greatly. Designed for special applications that require flow in both directions and incorporate an anti-water hammer design for liquid applications. Standard visual indicator shows open or closed position.

Series SAV-BT Angle Seat Valve - Bronze NPT

Low Cost, Compact Design, For Use with

Gases and Liquids

Can be used in most gas, liquid and steam applications
Integral heat sink protects Polyamide actuator
Can be mounted in any position
Actuator can be rotated 360° for positioning pressure ports

Series SAV-ST Angle Seat Valve - Stainless Steel NPT

Low Cost, Compact Design, For Use with

Gases & Liquids

Can be used in most gas, liquid and steam applications
Integral heat sink protects Polyamide actuator
Can be mounted in any position
Actuator can be rotated 360° for positioning pressure ports

Bulk Head Connectors

Connectors that allow for easy installation of blow tube through the dust collector wall and eliminate the need for welding of use of additional flanges.

Series BHC Bulk Head Connector

Coupling Accessories

Allow for easy installation of blow tube through the dust collector wall and eliminate the need for welding of use of additional flanges.
The fittings enable easy removal and re-assembly of blow tubes for cleaning and maintenance.
BHC models are available in single connection for through tube mounting or double connection for two piece tube mounting.

Air Filters / Regulators

Filters, regulators and lubricators for pneumatic systems.

Series AFR Air Filter Regulator

Self-Relieving

Stable output

Low air consumption

40 micron filter

Series AFR2 Instrument Air Filter Regulators

Compact, Stainless Steel Models, Cost-Effective

Compact size

Self-relieving regulator

5 micron filter

Series MPR Miniature Pressure Regulator

Air or Water Regulator, Compact and Lightweight, Low Cost

Low cost
Easy and precise adjustment
Compact