|
| Home |  | Madgetech - HiTemp140-FP Data Logger | |
|
|
|
HiTemp140-FPST-6 — 902330-00
HiTemp140-FPST-12 — 902312-00
HiTemp140-FPST-36 — 902313-00
HiTemp140-FPST-72 — 902316-00
HiTemp140-FPST-6-KR — 902339-00
HiTemp140-FPST-36-KR — 902336-00
The latest version of the HiTemp140-FP replaces the following SKU’s:
HiTemp140-FP-6 (6 inch flexible probe ) — 902003-00
HiTemp140-FP-12 (12 inch flexible probe ) — 900211-00
HiTemp140-FP-36 (36 inch flexible probe ) — 900212-00-36″
HiTemp140-FP-72 (72 inch flexible probe ) — 900218-00-72″
The HiTemp140-FP is a high temperature data logger built for use in
harsh environments. The body of the HiTemp140-FP can withstand
temperatures ranging from -40 °C to +140 °C (-40 °F to +284 °F), but can
extend to higher temperatures when used with MadgeTech’s thermal
barrier options.
The HiTemp140-FP is compatible with the latest MadgeTech 4 Software
making starting, stopping, and downloading simple and easy. Graphical,
tabular, and summary data is provided for analysis and can be viewed as
customizable engineering units.
General
| Memory |
65,536 readings |
| Reading Rate |
1 reading every 0.25 seconds up to 1 reading every 24 hours |
| Baud Rate |
125,000 |
| Battery Life |
2 years typical (1 minute reading rate)
User Replaceable Battery |
| Material |
Body: 316 Stainless Steel
Probe: PFA Insulated Cable with Stainless Steel Tip |
| Dimensions |
Body: 2.95 in x 0.97 in x 0.97 in (75 mm x 24.6 mm x 24.6 mm)
Probes: HiTemp140-FPST-6: 6 in x 0.13 in (152.5 mm x 3.2 mm)
HiTemp140-FPST-12: 12 in x 0.13 in (304.8 mm x 3.2 mm)
HiTemp140-FPST-36: 36 in x 0.13 in (914 mm x 3.2 mm)
HiTemp140-FPST-72: 72 in x 0.13 in (1829 mm x 3.2 mm) |
| Key Ring End Cap |
Key ring replaces standard bottom
Thru-hole: 0.150" |
| IP Rating |
IP68 |
| Submersible |
Yes |
| Operating Environment |
-40 °C to +140 °C (-40 °F to +284 °F) Body of Logger Cannot Exceed 140 °C
0 %RH to 100 %RH, 0 PSIA to 100 PSIA
With Thermal Shield: -200 °C to +250 °C (-328 °F to +482 °F) |
| Required Interface Package |
IFC400 or IFC406 |
| Approvals |
CE |
| Weight |
0.1875 LBS |
Temperature
| Temperature Sensor |
Flexible RTD Probe |
| Temperature Resolution |
0.01 °C (0.018 °F) |
| Temperature Calibrated Accuracy |
±0.1 °C (0.18 °F) |
| Probe Temperature Range |
-60 °C to +260 °C (-76 °F to +500 °F) |
Accessories
CF200 Canning Fitting
- CF200 Canning Fitting for Data Loggers — CF200
- The CF200 Canning Fitting securely attaches MadgeTech HiTemp140 data
loggers to jar lids, cans or other containers, with the data logger
probe inserted into the container to monitor internal temperatures.
- The
CF200 can withstand temperatures up to 140 °C (284 °F) making it ideal
for use in a variety of canning applications in a wide range of
industries and environments.
- Compatible with the HiTemp140-FP, HiTemp140-PT-5, HiTemp140-2-TD, and HiTemp140-5.25-TD data loggers.
|
DLS100
- DLS100 – 900087-00
- The DSL100 (Data Logger Stand) is a compact, portable base for use
with the HiTemp140, PRTemp140, PR140, Temp1000 and RHTemp1000 series of
MadgeTech data loggers.
- Made of 316 Stainless Steel, this sleek and handy stand is weighted
to help stabilize data loggers while in use or used as a caddy when the
logger is stored.
- It can withstand temperatures up to 150 °C (302 °F).
- Dimensions: 0.65 in x 1.60 in 1.60 in (16.5 mm x 40.6 mm x 40.6 mm)
|
ER1425MR-145 Lithium Battery
- ER1425MR-145 — 900097-00
- 145 °C 3.6V Lithium Battery, ½ AA Pressure Contact.
|
HiTemp140 O-Rings
- HiTemp140 O-Rings — 900229-00
- One set of replacement o-rings for the HiTemp140
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ancor Sdn Bhd
D-2-4, Setiawalk, Pusat Bandar Puchong, 47160 Puchong, Selangor, Malaysia
Tel: +6012-921 3877 , 03-58797121
Email: info@ancor.com.my ; ancor.my@gmail.com
|
|
|
 |
|
