ETR101A

ETR101A — 900098-00

The ETR101A is a data logging system for exhaust temperature profiling. Includes standard calibration certificate. Read More >

Key Features:

TC101A Temperature Data Logger
Type K Thermocouple
IFC200 Data Logger Interface
Weatherproof Enclosure

The ETR101A Includes:
(1) TC101A: Temperature Data Logger
(1) Type K Thermocouple
(1) IFC200: Data Logger Interface
(1) Weatherproof Enclosure
(1) Hex Screwdriver
(1) MadgeTech 4 Software

The ETR101A is a complete system designed to profile the exhaust temperature of on-road vehicles and off-road equipment. Once the temperature profile is created, its provided to the diesel particulate filter (DPF) manufacturer to aid in the selection of the correct DPF for the exhaust system.

Setup is simple and easy. Using the MadgeTech 4 Software, program the data logger for a set period of time then mount the logger (in its water resistant enclosure) to the vehicle. Data from the logger is then retrieved by using the IFC200 to download data to the MadgeTech 4 Software. Graphical, tabular, and summary data is provided for analysis and can be viewed as customizable engineering units.

General

Memory	1,032,192 readings (all channels enabled)
Reading Rate	1 reading every second up to 1 reading every 24 hours
Baud Rate	115,200
Cold Junction Compensation	Automatic
Channels	1 Internal & 1 Remote
LED Indicators	Red and Green
Push-Button Start	Yes
Battery Life	10 years typical, dependent upon frequency and duty cycle
Material	ABS plastic
Dimensions	1.4 in x 2.2 in x 0.6 in (36 mm x 56 mm x 16 mm)
Operating Environment	-20 °C to 80 °C (-4 °F to +176 °F), 0 %RH to 100 %RH
Required Interface Package	IFC200

Temperature

Temperature Sensor	Semiconductor
Temperature Range	-40 °C to +80 °C (-40 °F to +176 °F)
Temperature Resolution	0.1 °C (0.18 °F)
Temperature Calibrated Accuracy	±0.25 °C (±0.45 °F)
Remote Channel Temperature Sensor	Thermocouple Type K
Remote Channel Temperature Range	-260 °C to +899 °C (-436 °F to +1650.2 °F)
Remote Channel Temperature Resolution	0.1 °C (0.18 °F)
Remote Channel Temperature Calibrated Accuracy	±0.5 °C

Accessories

IFC200

IFC200 — 900298-00
USB Interface Cable Package for Standard Series Data Loggers.
MadgeTech’s IFC200 interface cable communicates between stand alone data loggers and the MadgeTech software.
Through this interface, loggers can be started, stopped or downloaded.
The IFC200 can be directly connected to a computer without installing any drivers.
The improved IFC200 can now operate at up to 500 Volts RMS relative to the computer’s earth ground when attached.
The IFC200 is equipped with communication LEDs, that provide a quick indication of the device’s status. The blue light illuminates when the device is plugged in and successfully recognized by Windows.
The red light flashes when data is sent, and the green light flashes when data is received.

LTC-7PN Lithium Battery

LTC-7PN Lithium Battery — 900352-00
3.6 Volt, Lithium Battery, 750 mAH.
These batteries are only equipped with two leads and made specifically for use with MadgeTech data loggers.

TJ36-CASS-18U-6-SMP-M

TJ36-CASS-18U-6-SMP-M — 901733-00
Type K Thermocouple with 6 in. x 1/8 in diameter.