Ultrasonic

Ultrasonic flow meters are sensors with electrical transmission output. Models are compact and lightweight. The meters are easy to operate and are ideal for any flow measurement situation. There are options of clamp on flowmeters for the ideal use of clean liquids containing no air bubbles such as pure water.

Series UXF2 Ultrasonic Flow Converter

Excellent Performance and Easy Operation

Series UXF2 Ultrasonic Flow Converters are paired with Series SX3 detectors in order to utilize the transit-time measuring method. Two ultrasonic sensors are mounted on the pipe exterior, and each transmits an ultrasonic pulse to the opposite sensor. The difference in the transit times of the two waves is used to calculate the flow velocity. This meter is a clamp-on type ultrasonic flowmeter for permanent use and is ideal for clean liquids containing no air bubbles such as pure water. The easy-to-use compact and lightweight design is intended for integration into mechanical devices. The adoption of a sound velocity measurement system, which calculates sound velocity from the transit time, keeps the flowmeter unaffected by the temperature and the pressure of the fluid to be measured. Additionally, with the use of a high-speed transit time processor, the system cycle is 0.2 seconds and applicable to short batch processes.

Product Applications

Monitor flow rate of heating and cooling water.

Monitor flow rate as part of BTU calculations.

Models & Ordering

Model	Description
UXF2-31P1	Ultrasonic flowmeter converter, 20-30 VDC

Series UXF3 Ultrasonic Flowmeter Converter

Excellent Performance and Easy Operation

The Series UXF3 Ultrasonic Flowmeter Converters are paired with Series SX1 or SX2 sensors in order to utilize the transit-time measure method. Thanks to microprocessor-based electronics, the flowmeter can easily be configured from the front keypad to specific applications. The flowmeter is suitable for liquid flow measurements for pipes from 1/2 inch to 19.5 feet diameter. The accuracy of this flowmeter falls within ± 1% of the flow rate. The UXF3 also provides excellent resistance against aerated flow such as sludge, raw sewage, and bubble contained flow. The multilingual display supports a variety of language choices. The combination of the easy to read LCD screen and front panel buttons along with the variety of language selections makes this flowmeter very user friendly. This flowmeter incorporates the latest electronics and high-speed digital signal processing technologies (32 bit MPU), realizing high performance and easy operation. See bulletin F-107-UXF3 for more details.

Models & Ordering

Model	Description
UXF3-A0	Ultrasonic flowmeter converter, 100-240 VAC, 50/60 Hz.

Series ULF Ultrasonic Flow Transmitter

Integrated LCD Display, Non-Contact Level Sensing for Open Channel Flow

The Series ULF is an ultrasonic continuous flow measurement transmitter perfect for maintenance free, non-contact measurement of open channels. This series operates on ultrasonic technology and offers dependable, highly accurate measurements. The ULF features easy programming with a 4 digit LCD screen and a simple menu format. It is perfect for direct installation over flumes and weirs and compensates for virtually all environmental conditions such as vapors, gases, temperature variations, and wind. The weatherproof IP65 body makes this unit ideal for any flow measurement situation.