|
| Home |  | Dwyer- In-Line Flowmeter | |
|
|
|
In-Line
In-line flowmeters are indicators for flow rate. Dwyer's flow meters are
ideal for measurement of a range of compatible gases, oil, or water
based liquids. Applications include deionized water flow, pickling,
compressed gases, harsh environments, coolant lines, and industrial
applications.
Series HF In-Line Flow Monitors
For Air, Water or Caustic Fluids, ±2% FS, Unrestricted Mounting, High Temperature and Pressure Options
Series HF In-Line Flow Monitor - For Air,
Water or Caustic Fluids, ±2.5% Accuracy
|
Series HF In-Line Flow Monitor,
HFS-2-02 shown
|
The SERIES HF In-Line Flow Monitors
are ruggedly constructed and ideal for direct measurement for a range of
compatible gases, oil or water based liquids. This Series is designed
based on a floating orifice disk and variable area flow measurement.
Flowing media forces linear motion of the orifice disk and a ring shaped
magnet which ride on a tapered center shaft. The transfer magnet drives
a clearly visible magnet follower located outside the flow tube, and a
ring on the magnet follower indicates flow rate on the direct reading
scale.
Note: If you require a calibration certificate with your flowmeter, please contact customer service to place your order.
Product Applications
- Setting pressure relief valves
- Fluid handling equipment
- Detecting low-flow rates for lubricating liquids
- Pulp and paper
- Industrial maintenance
- Fluid power
- Heating loop flow
Models & Ordering
| Model |
Description |
| HFL-2-05 |
In-line flow monitor, 1/2" female NPT, 0.5-5 GPM (1-19 LPM) oil. |
| HFL-4-25 |
In-line flow monitor, 1" female NPT, 2-25 GPM (7.5-95 LPM) oil. |
|
Series HFPC & HFPS Plastic Flowmeters
Mount in any Position, Corrosive Resistant
|
Series HFPC Plastic Flowmeter -
±5% FS Accuracy,
Mount in any Position
|
Series HFPS Plastic Flowmeter -
±5% FS Accuracy,
Mount in any Position
|
The SERIES HFPC & HFPS Flowmeters
are a series of clear body, inline flowmeters. This Series consists of
the HFPC polycarbonate body flowmeter and the HFPS polysulfone body
flowmeter. These flowmeters have dual scales measuring both in GPM and
LPM.
CAUTION: Series HFPC & HFPS Flowmeters are for indoor
use only or areas without direct sunlight. Polycarbonate &
polysulfone are adversely affected by ultraviolet light.
Product Applications
- Chemical processing
- Pulp and paper
- Process control
- Fluid power
- Hydraulic flow
- Heating loop flow
|
Series SSM All Metal Flowmeters
Available Stainless Steel for Industrial Environments
Series SSM All Metal Flowmeter - Available Stainless Steel for Industrial Environments (1-1/2' process connection)
|
Series SSM All Metal Flowmeter - Available Stainless Steel for Industrial Environments (3/4' process connection)
|
The SERIES SSM Metal Flowmeters are
rugged, general purpose industrial flowmeters with a direct reading
scale and ±2% accuracy. These meters are of T316SS construction and
offered in 3/4" and 1-1/2" process connections.
Product Applications
- Dirty or opaque fluids
- High temperature & pressure industrial flow
- Harsh environments
- Coolant lines
- Compressed gases
|
Series PVF & CPF Flowmeters
Perfect for Compatible Acids, Caustics and D.I. Water
|
Series CPF PVC and CPVC Flowmeters - Perfect for Compatible Acids, Caustics and D.I. Water |
Series PVF PVC and CPVC Flowmeters - Perfect for Compatible Acids, Caustics and D.I. Water
|
The SERIES PVF & CPF Flowmeters
are heavy bodied meters for corrosives and high purity fluids. The
flowmeters are available with 3/4", 1-1/2", 3", and 4" female NPT
connections with optional flange connections.
Product Applications
- Deionized water flow
- Water & wastewater treatment
- Electrogalvanization
- Pickling
|
Series TVF Total View Industrial Flowmeters
View Flow Rate from 360°, Water or Air Ranges
The SERIES TVF Total View Industrial
Flowmeters are economically priced, tough, simple and accurate meters.
The flowmeters have a full-scale accuracy of ±2% and constructed of
T-316 stainless steel. The Series TVF flowmeters are available with
standard 3/4" and 1-1/2" female NPT connections.
Product Applications
- Water & oil flow monitoring
- Coolant lines
- Compressed gases
- Industrial applications
|
Series STFLO Stainless Steel Flowmeters
Ideal for Steam Applications
Series STFLO Stainless Steel Flowmeter - Ideal for Steam Applications (1-1/2' process connection)
|
Series STFLO Stainless Steel Flowmeter - Ideal for Steam Applications (3/4' process connection)
|
The SERIES STFLO Steam Flowmeters are
heavy duty, industrial flowmeters with high temperature and pressure
limits. These units include a geothermal PTFE O-ring with direct reading
scale and ±2% accuracy. These meters are of T316SS construction and
offered in 3/4"and 1-1/2" process connections.
Product Applications
- Monitoring steam flow
- High temperature & pressure industrial flow
- Harsh environments
|
|
|
|
|
|
|
|
Ancor Sdn Bhd
D-2-4, Setiawalk, Pusat Bandar Puchong, 47160 Puchong, Selangor, Malaysia
Tel: +6012-921 3877 , 03-58797121
Email: info@ancor.com.my ; ancor.my@gmail.com
|
|
|
 |
|
