ANCOR SDN BHD
Tel: +6012-921 3877 ;
       +603-58797121
Email: info@ancor.com.my ;
           ancor.my@gmail.com
D-2-4, Setia Walk,
Pusat Bandar Puchong,
47160 Puchong, Selangor
   Home      Dwyer- Differential Pressure Gages
         
 
 
 
 
 
 

Gages

Pressure, flow and piston-type gages are all found within this category. Clean design, small size and low cost with enough accuracy for all but the most demanding applications, these gages are the best around. Gages are indicators for the difference between two pressures or simply a single pressure.

 
 
 
 
 
 
 

Series 2000 Magnehelic® Differential Pressure Gages

Indicate Positive, Negative or Differential, Accurate within 1%

 
 
 
 
 
 

Series 2000 Magnehelic® Differential Pressure Gages     Series 2000 Magnehelic® Differential Pressure Gages     Series 2000 Magnehelic® Differential Pressure Gages


Select the Series 2000 Magnehelic® Gage for a versatile low differential pressure gage with a wide choice of 81 models and 27 options to choose from. Using Dwyer’s simple, frictionless Magnehelic® gage movement, it quickly indicates air or noncorrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration, over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.

Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.

Please see Series AT22000 for ATEX approved.

 
 
 

Product Applications

 
  • Filter Monitoring
  • Air Velocity with Dwyer Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication
 
 

Models & Ordering

 
Model Description
2000-0 Differential pressure gage, range 0-0.50" w.c., minor divisions .01, calibrated for vertical scale position.
2000-00 Differential pressure gage, range 0-0.25" w.c., minor divisions .005, calibrated for vertical scale position.
2000-00N Differential pressure gage, range .05-0-.2" w.c., minor divisions .005, calibrated for vertical scale position.
2001 Differential pressure gage, range 0-1.0" w.c., minor divisions .02.
2002 Differential pressure gage, range 0-2.0" w.c., minor divisions .05.
2003 Differential pressure gage, range 0-3.0" w.c., minor divisions .10.
2004 Differential pressure gage, range 0-4.0" w.c., minor divisions .10.
2005 Differential pressure gage, range 0-5.0" w.c., minor divisions .10.
2006 Differential pressure gage, range 0-6.0" w.c., minor divisions .20.
2008 Differential pressure gage, range 0-8.0" w.c., minor divisions .20.
2010 Differential pressure gage, range 0-10" w.c., minor divisions .20.
2015 Differential pressure gage, range 0-15" w.c., minor divisions .50.
2020 Differential pressure gage, range 0-20" w.c., minor divisions .50.
2025 Differential pressure gage, range 0-25" w.c., minor divisions .50.
2030 Differential pressure gage, range 0-30" w.c., minor divisions 1.0.
2040 Differential pressure gage, range 0-40" w.c., minor divisions 1.0.
2050 Differential pressure gage, range 0-50" w.c., minor divisions 1.0.
2060 Differential pressure gage, range 0-60" w.c., minor divisions 2.0.
2080 Differential pressure gage, range 0-80" w.c., minor divisions 2.0.
2100 Differential pressure gage, range 0-100" w.c., minor divisions 2.0.
2150 Differential pressure gage, range 0-150" w.c., minor divisions 5.0.
 
 
 
 
 
 
 
 
 
 
 
 

Series 4000 Capsuhelic® Differential Pressure Gage

Measures Pressure, Vacuum or Differential, Suitable for Internal Pressures to 500 psig

 
 
 
 
 
 
 


 


The Series 4000 Capsuhelic® Differential Pressure Gage is designed to give fast, accurate indication of differential pressures. The gage may be used as a readout device when measuring flowing fluids, pressure drop across filters, liquid levels in storage tanks and many other applications involving pressure, vacuum or differential pressure. The pressure being measured is held within a capsule which is an integral part of the gage. This containment of the pressure permits the use of the gage on system pressures of up to 500 psig, even when differentials to be read are less than 0.1 in w.c.

Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.

 

Product Applications

 
  • Fluid flow
  • Liquid storage tanks
  • Filter pressure drops
  • Vacuum or differential pressure
 
 
 

Models & Ordering

 
Model Description
4000-0 Differential pressure gage, range 0-0.5" w.c., for vertical scale position only.
4001 Differential pressure gage, range 0-1.0" w.c., for vertical scale position only.
4002 Differential pressure gage, range 0-2.0" w.c., for vertical scale position only.
4003 Differential pressure gage, range 0-3.0" w.c., for vertical scale position only.
4004 Differential pressure gage, range 0-4.0" w.c., for vertical scale position only.
4005 Differential pressure gage, range 0-5.0" w.c., for vertical scale position only.
4006 Differential pressure gage, range 0-6.0" w.c.
4008 Differential pressure gage, range 0-8.0" w.c.
4010 Differential pressure gage, range 0-10" w.c.
4015 Differential pressure gage, range 0-15" w.c.
4020 Differential pressure gage, range 0-20" w.c.
4025 Differential pressure gage, range 0-25" w.c.
4030 Differential pressure gage, range 0-30" w.c.
4040 Differential pressure gage, range 0-40" w.c.
4050 Differential pressure gage, range 0-50" w.c.
4060 Differential pressure gage, range 0-60" w.c.
4080 Differential pressure gage, range 0-80" w.c.
4100 Differential pressure gage, range 0-100" w.c.
4150 Differential pressure gage, range 0-150" w.c.
4200 Differential pressure gage, range 0-200" w.c.
4300 Differential pressure gage, range 0-300" w.c.
4400 Differential pressure gage, range 0-400" w.c.
4500 Differential pressure gage, range 0-500" w.c.
 
 
 
 
 
 
 
 
 
 
 
 

Series 2-5000 Minihelic® II Differential Pressure Gage

Combining High Accuracy, Compactness, Dependability, and Low Cost

 
 
 
 
 
 
 
 


Combining clean design, small size and low cost with enough accuracy for all but the most demanding applications our Series 2-5000 Minihelic® II Differential Pressure Gage offers the latest in design features for a dial type differential pressure gage. It is our most compact gage but is easy to read and can safely operate at total pressures up to 30 psig.

 
 

Product Applications

 
  • Room Positive Pressure Sensing
  • Local Indication on Filter Status
  • Face Velocity on Fume Hood
  • Duct Pressures
  • Cabinet Air-Purging
  • Medical Respiratory Equipment
  • Air Samplers
  • Electronic Air Cooling Systems
  • Laminar Flow Hoods
 
 

Models & Ordering

 
 
 
Model Description
2-5000-0 Differential pressure gage, range 0-0.5" w.c.
2-5001 Differential pressure gage, range 0-1.0" w.c.
2-5002 Differential pressure gage, range 0-2.0" w.c.
2-5003 Differential pressure gage, range 0-3.0" w.c.
2-5005 Differential pressure gage, range 0-5.0" w.c.
2-5010 Differential pressure gage, range 0-10" w.c.
2-5020 Differential pressure gage, range 0-20" w.c.
2-5040 Differential pressure gage, range 0-40" w.c.
2-5060 Differential pressure gage, range 0-60" w.c.
2-5100 Differential pressure gage, range 0-100" w.c.
 
 
 
 
 
 
 
 
 
 
 
 
 

Series 2000-SP Magnehelic® Differential Pressure Gages

Indicate Positive, Negative or Differential, Accurate within 2%

 

 

Series 2000-SP Magnehelic® Differential Pressure Gage has a bright red LED on the right of the scale showing when setpoint is reached. Field adjustable from gage face, unit operates on 12-24 VDC. Requires MP or HP style cover and bezel.

 
 

Models & Ordering

 
 
Model Description
2000-0-SP Differential pressure gage, range 0-0.50" w.c., with set point indicator.
2001-SP Differential pressure gage, range 0-1" w.c., with set point indicator.
2002-SP Differential pressure gage, range 0-2" w.c., with set point indicator.
2005-SP Differential pressure gage, range 0-5" w.c., with set point indicator.
2010-SP Differential pressure gage, range 0-10" w.c., with set point indicator.
 
 
 
 
 
 
 
 
 
 
 
 

Series DM-1000 DigiMag® Digital Differential Pressure and Flow Gages

24 Volt or Battery Powered. Fits in Magnehelic® Gage Cut-Out

 
 
 
 
 
 
 
 


The DigiMag® Series DM-1000 Digital Differential Pressure and Flow Gages monitor the pressure of air and compatible gases just as its famous analog predecessor the Magnehelic® Differential Pressure Gage. All models are factory calibrated to specific ranges. The 4-digit LCD can display readings in common English and metric units so conversions are not necessary. The simplified four button operation reduces set up time and simplifies calibration with its digital push button zero and span.
 
 
 

Product Applications

 
  • Filter monitoring
  • Air velocity or flow
  • Blower vacuum monitoring
  • Fan pressure indication
  • Duct, room or building pressures
  • Clean room positive pressure indication
 
 

Models & Ordering

 
 
Model Description
DM-1102 DigiMag® differential digital pressure gage, range 0-0.25" w.c.
DM-1103 DigiMag® differential digital pressure gage, range 0-0.5" w.c.
DM-1104 DigiMag® differential digital pressure gage, range 0-1" w.c.
DM-1105 DigiMag® differential digital pressure gage, range 0-2" w.c.
DM-1107 DigiMag® differential digital pressure gage, range 0-5" w.c.
DM-1108 DigiMag® differential digital pressure gage, range 0-10" w.c.
DM-1109 DigiMag® differential digital pressure gage, range 0-15" w.c.
DM-1110 DigiMag® differential digital pressure gage, range 0-25" w.c.
DM-1111 DigiMag® differential digital pressure gage, range 0-50" w.c.
DM-1112 DigiMag® differential digital pressure gage, range 0-100" w.c.
DM-1122 DigiMag® differential digital pressure gage, range 0.25-0-0.25" w.c.
DM-1123 DigiMag® differential digital pressure gage, range 0.5-0-0.5" w.c.
DM-1124 DigiMag® differential digital pressure gage, range 1-0-1" w.c.
DM-1125 DigiMag® differential digital pressure gage, range 2-0-2" w.c.
DM-1127 DigiMag® differential digital pressure gage, range 5-0-5" w.c.
DM-1128 DigiMag® differential digital pressure gage, range 10-0-10" w.c.
 
 
 
 
 
 
 
 
 
 
 
 
 

Series PTGD Differential Pressure Piston-Type Gage

Excellent Accuracy and Over-Pressure Ratings

 
 
 
 
 
 
 
 



The Series PTGD Differential Pressure Piston-Type Gage can be used to measure the pressure drop across filters, strainers, pump performance testing, and heat exchanger pressure drop monitoring. Its simple, rugged design possesses weather and corrosion resistant gage front with a shatter resistant lens. The Series PTGD contains a piston-sensing element which provides different differential pressure ranges with full-scale accuracies of ±2%. Constructed with aluminum or 316SS and available with two 1/4" female NPT end connections, the Series PTGD provides over-range protection rated to 3000 psig (200 bar) or 6000 psig (400 bar) depending on model. Standard models come with in-line connections. Back or bottom connections are also available.
 
 

Product Applications

  • Filter pressure drop
  • Strainers
  • Pump performance testing
  • Heat exchanger pressure drop
 
 

Models & Ordering

 
 
 
Model Description
PTGD-AA01A Differential piston gage, in-line connections, range 0-5 psid.
PTGD-AA02A Differential piston gage, in-line connections, range 0-10 psid.
PTGD-AA03A Differential piston gage, in-line connections, range 0-15 psid.
PTGD-AA04A Differential piston gage, in-line connections, range 0-20 psid.
PTGD-AA05A Differential piston gage, in-line connections, range 0-25 psid.
PTGD-AA06A Differential piston gage, in-line connections, range 0-30 psid.
PTGD-AA07A Differential piston gage, in-line connections, range 0-40 psid.
PTGD-AA08A Differential piston gage, in-line connections, range 0-50 psid.
PTGD-AA09A Differential piston gage, in-line connections, range 0-60 psid.
PTGD-AA10A Differential piston gage, in-line connections, range 0-80 psid.
PTGD-AA11A Differential piston gage, in-line connections, range 0-100 psid.
PTGD-AA12A Differential piston gage, in-line connections, range 0-150 psid.
 
 
 
 
 
 
 
 
 
 
 
 
 

Series PFG2 Process Filter Gage

Indicates Process Filter Status, In-Line or Bottom Connect Mounting

 
 
 
 
 
 
 

The Series PFG2 Process Filter Gage is designed for determining the state of an inline filter. The differential pressure indicator determines the pressure drop on either side of a filter through its 1/8" female NPT pressure connections, and relates the value to one of three zones: clean (green), change (yellow), or dirty (red). The Series PFG2 is perfectly suited for filter applications, line loss, valve drop, and many other differential pressure applications where a simple indicator is needed. The direction of process flow is indicated on the dial, with the arrow pointing to the low pressure port. The PFG2 can be connected in-line through the side process connections, but can also be directly mounted through the outlet/inlet.
 
 
 

Product Applications

 
  • Filter pressure drop
  • Filter status
  • Valve drop
  • Line loss
 
 

Models & Ordering

 
 
Model Description
PFG2-02 Process filter gage, range 0-5 psid, green zone 0-2.5 psid, yellow zone 2.5-3.75 psid, red zone 3.75-5 psid.
PFG2-03 Process filter gage, range 0-10 psid, green zone 0-5 psid, yellow zone 5-7.5 psid, red zone 7.5-10 psid.
PFG2-06 Process filter gage, range 0-25 psid, green zone 0-11 psid, yellow zone 11-18.5 psid, red zone 18.5-25 psid.
 
 
 

 
 
 
 
 
 
 

Series AT22000 ATEX/IECEx Approved Series 2000 Magnehelic® Differential Pressure Gage

Flame-Proof Enclosure, Accurate within 2%

 

 
 
 
 

The popular Series AT22000 Magnehelic® Differential Pressure Gage is now available in a flame-proof enclosure with the new ATEX/IECEx approved AT22000 Series. This gage can indicate positive, negative or differential pressures and is accurate within 2%.

• Attention: Check local safety rules and warnings on unit and manual for a correct use of the instrument in hazardous area.

Please see Series 2000 for non-ATEX/IECEx approved.


Product Applications

 
  • Fan and blower pressures
  • Filter resistance
  • Air velocity
  • Furnace draft
  • Liquid levels with bubbler systems
  • Pressure in fluid amplifier or fluidic systems
 
 
 
 
 
 
 
 
 
 

Series 2000-HA High Accuracy Magnehelic® Differential Pressure Gage

Indicate Positive, Negative or Differential, Accurate within 1%

 
 
 
 
 
 
 
 
Series 2000-HA High Accuracy Magnehelic® Differential Pressure Gage     Series 2000-HA High Accuracy Magnehelic® Differential Pressure Gage     Series 2000-HA High Accuracy Magnehelic® Differential Pressure Gage

The Series 2000-HA High Accuracy Magnehelic® Gage is twice as accurate as the standard Magnehelic® gage. The well-engineered High Accuracy Magnehelic® Gage offers a mirrored overlay as standard in order to eliminate any parallax error when taking measurements. A six point calibration certificate is included with each high accuracy model. The rugged IP67 casing helps fully protect against dust and water ingress. The redesigned corrosion resistant brushed 304 stainless steel bezel option offers a clean tapered design, yet minimizes the possibility of any dust accumulation on the edges. See Series 2000 Magnehelic® Gage for additional information.

 
 
 

Product Applications

  • Clean room positive pressure indication
  • Filter monitoring
  • Air velocity with Dwyer pitot tube
  • Blower vacuum monitoring
  • Fan pressure indication
  • Duct, room, or building pressures
 
 

Features

  • Accurate within 1%
  • Mirrored scale overlay eliminates parallax error
  • Six point calibration certificate included
  • IP67 - Fully protects against dust and immersion
  • Optional corrosion resistant brushed 304 SS bezel
 
 
 
 
 
 
 
 
 

Ancor Sdn Bhd
D-2-4, Setiawalk, Pusat Bandar Puchong, 47160 Puchong, Selangor, Malaysia
Tel: +6012-921 3877 , 03-58797121
Email: info@ancor.com.my ; ancor.my@gmail.com