|
| Home |  | Dwyer- Dial Flowmeter | |
|
|
|
Dial
Dwyer offers different types of Dial Flowmeters for various
applications. Flow meters measure water, oil, gas or air flow rates.
Applications include calculating required fill or drain times for tanks,
water towers, backflow prvention, heat exchangers, and oil & gas
equipment.
Series RMVII Rate-Master® Dial-Type Flowmeters
For Panel Mounting, Three Ranges to 10 GPM Water, High Pressure Limits
The SERIES RMVII Rate-Master®
Flowmeters consists of a machined brass meter body which is ideally
suited for water flows with ±5% of full scale accuracy. Body design fits
standard 4-1/2" mounting hole layouts per ANSI B40.1. Inlet and outlet
threads are standard 3/4" female NPT.
Product Applications
- Monitor coolant flow through ingot heaters, high-amp switchgear, resistance welders,
heat exchangers, compressors, scrubbers
- Monitor water consumption to different processes and operations for more efficient
operations
- Calculate required fill or drain times for tanks, water towers
Models & Ordering
| Model |
Description |
| RMVII-10 |
Dial-type flowmeter, range 0-10 SCFM, 0-280 LPM air. |
| RMVII-12 |
Dial-type flowmeter, range 0-30 SCFM, 0-850 LPM air. |
| RMVII-14 |
Dial-type flowmeter, range 0-50 SCFM, 0-1400 LPM air. |
|
Series RMV Rate-Master® Dial-Type Flowmeters
Brass Body, Three Ranges to 20 GPM Water, Shatterproof Construction
The SERIES RMV Rate-Master®
Flowmeters measure higher water flow rates with ±2% of full scale
accuracy at an affordable price. Stocked models are fitted with 1"
female NPT inlet and outlet; 3/4" and 1/2" sizes are also available.
Install in line, supported by piping or flush panel mount with complete
hardware package included.
Product Applications
- Monitor coolant flow through ingot heaters, high-amp switchgear, resistance welders, heat exchangers, compressors, scrubbers.
- Monitor water consumption to different processes and operations for more efficient operation.
- Calculate required fill or drain times for tanks, water towers.
Models & Ordering
| Model |
Description |
| RMV-1-3 |
Dial type flowmeter, 0-5 GPM water, 1" female NPT. |
| RMV-2-3 |
Dial type flowmeter, 0-10 GPM water, 1" female NPT. |
| RMV-3-3 |
Dial type flowmeter, 0-20 GPM water, 1" female NPT. |
|
Series DTFA Variable-Area Flowmeter for Gases
Economical, Aluminum Body, 5% FS Accuracy
The Series DTFA Variable-Area Flowmeter for Gases measures gas flow
rates with ±5% of full-scale accuracy at an affordable price. Rugged aluminum
construction ensures great compatibility and the strength to withstand system
pressures of up to 3000 psig (200 bar). Available in either 1/4" or 1/2" NPT
connections. Comes pre-calibrated for horizontal in-line mounting.
Product Applications
- Monitoring pressure drop across filters or strainers
- Flow scale based on differential pressure
- Liquid level given pressure differential between bottom and top of tank
- Hydraulic equipment
- Oil & gas equipment
- Heat exchangers
- Backflow prevention
Models & Ordering
| Model |
Description |
| DTFA-1A-10A |
Range 1.5-10 SCFM, 1/4" npt connection |
| DTFA-1A-15A |
Range 2.0-15 SCFM, 1/4" npt connection |
| DTFA-1A-20A |
Range 3.0-20 SCFM, 1/4" npt connection |
| DTFA-1A-25A |
Range 3.0-25 SCFM, 1/4" npt connection |
|
Series DTFF Fixed-Orifice Flowmeter for Low Flow Rates
316 SS Body, Oil/Gas/Water Calibration
The Series DTFF Fixed-Orifice Flowmeter for Low Flow Rates
measures water, oil, or air flow rates with great accuracy at a competitive
price. Rugged stainless steel construction ensures great compatibility and is an
excellent choice for high line pressure applications, with a maximum pressure
of 3000 psig (200 bar). This is all without sacrificing the sensitivity required
for low flow measurements. Available in a wide range of flow rates for each
calibration, with stainless steel construction as standard. Comes pre calibrated
for horizontal in-line mounting.
Models & Ordering
| Model |
Description |
| DTFF-1S-10W |
Range 0-10 GPH, water calibration, 1/4" npt |
| DTFF-1S-15W |
Range 0-15 GPH, water calibration, 1/4" npt |
| DTFF-1S-25W |
Range 0-25 GPH, water calibration, 1/4" npt |
| DTFF-1S-40W |
Range 0-40 GPH, water calibration, 1/4" npt |
| DTFF-1S-4W |
Range 0-4 GPH, water calibration, 1/4" npt |
| DTFF-1S-8W |
Range 0-8 GPH, water calibration, 1/4" npt |
|
Series DTFO Variable-Area Flowmeter for Oil
Brass & 316 SS Body, 2% FS Accuracy
Series DTFO Variable-Area Flowmeter for Oil - 316SS Body, 2% FS Accuracy
|
Series DTFO Variable-Area Flowmeter for Oil - Brass Body, 2% FS Accuracy
|
The Series DTFO Variable-Area Flowmeter for Liquids measures oil
rates with ±2% of full-scale accuracy at an affordable price. Durable metal
construction ensures great reliability and the strength to withstand system
pressures of up to 3000 psig (200 bar). Available in 1/4", 1/2" and 1"
connections for a wide variety of applications. Comes calibrated for horizontal
in line mounting.
Product Applications
- Monitoring pressure drop across filters or strainers
- Flow scale based on differential pressure
- Liquid level given pressure differential between bottom and top of tank
- Hydraulic equipment
- Oil & gas equipment
- Heat exchangers
- Backflow prevention
Models & Ordering
| Model |
Description |
| DTFO-1B-1O |
Range 0-1 gpm oil, 1/4" npt, brass body |
| DTFO-1B-2O |
Range 0-2 gpm oil, 1/4" npt, brass body |
| DTFO-1B-4O |
Range 0-4 gpm oil, 1/4" npt, brass body |
|
Series DTFW Variable-Area Flowmeter for Liquids
In-Line Mounting, 2% FS Accuracy
Series DTFW Variable-Area Flowmeter for Liquids - In-Line Mounting, 2% FS Accuracy (Brass)
|
Series DTFW Variable-Area Flowmeter for Liquids - In-Line Mounting, 2% FS Accuracy (SS)
|
The Series DTFW Variable-Area Flowmeter for Liquids measures water
flow rates with ± 2% of full-scale accuracy at a competitive price. Durable metal
construction ensures great compatibility and the strength to withstand system
pressures of up to 3000 psig (200 bar). 1/4", 1/2" and 1" connections are
available, with construction choices of a high quality brass or stainless steel.
Comes pre-calibrated for horizontal in-line mounting.
Product Applications
- Monitoring pressure drop across filters or strainers
- Flow scale based on differential pressure
- Liquid level given pressure differential between bottom and top of tank
- Hydraulic equipment
- Oil & gas equipment
- Heat exchangers
- Backflow prevention
Models & Ordering
| Model |
Description |
| DTFW-1B-1W |
Range 0-1 GPM water, 1/4" npt, brass body |
| DTFW-1B-2W |
Range 0-2 GPM water, 1/4" npt, brass body |
| DTFW-1B-3W |
Range 0-3 GPM water, 1/4" npt, brass body |
| DTFW-1B-4W |
Range 0-4 GPM water, 1/4" npt, brass body |
| DTFW-1B-5W |
Range 0-5 GPM water, 1/4" npt, brass body |
|
|
|
|
|
|
|
|
Ancor Sdn Bhd
D-2-4, Setiawalk, Pusat Bandar Puchong, 47160 Puchong, Selangor, Malaysia
Tel: +6012-921 3877 , 03-58797121
Email: info@ancor.com.my ; ancor.my@gmail.com
|
|
|
 |
|
