PWM paddlewheel meter for liquid flow measurement.
Design Features
Flow meters for liquid flow applications
Jewel bearings allow for very low minimum flow rates
Easy to install and operate
Mounted horizontally or vertically
Only one moving part
Flow indication via transparent acrylic cover
Versatile square wave signal
Female NPT ports
Multiparameter: Flow and temperature outputs. Platinum RTD option
Polypropylene and chemically resistant PVDF models
Principles of Operation
Fluid flowing through the
unit causes the paddle wheel to spin. As the magnets embedded in the
paddle spin past the sensor, electrical pulses are produced in which
frequency is proportional to the flow rate. The revolutions per minute
and the K-factor (number of pulses/Gallon) make it is possible to
calculate the flow volume passing through the unit.
SPECIFICATIONS
ACCURACY ±1% FS
MAXIMUM TEMPERATURE 70° C (160° F)
MAXIMUM PRESSURE 10 bar (150 psi)
POWER 5 to 24 Vdc @ 2 mA
OUTPUT SIGNAL NPN open collector (load 30 mA max)
DIMENSIONS 56H x 108L x 53D mm (2.2 x 4.25 x 2.2")Without RTD and Hall switch adapters.
CABLE 1.8 m (6') or 3.7m (12') optional
RTD Platinum 0.00385 TCR, meetsEN 60751, Class B
Ancor Sdn Bhd
D-2-4, Setiawalk, Pusat Bandar Puchong, 47160 Puchong, Selangor, Malaysia
