Ancor Sdn Bhd

Model 2001LC

General purpose rack mount trace oxygen analyzer

The AMI model 2001LC is the ideal solution for measuring trace oxygen in a wide range of applications in a general purpose environment. In a small size, and at very low cost, it provides a complete electronic package and sample system using AMI’s patented cell block technology.

Unlike competitive analyzers, AMI sensor replacement requires minimal downtime due to the front panel sensor access and the patented AMI cell block. Typical time from a one minute air exposure to 10ppm is under 15 minutes.

OVERVIEW

Display reads oxygen from 0.05ppm up to 25.0% with no range changes
Analog output and alarms can be configured to operate over any of ten ranges from 0-10ppm to 0-25% for best resolution
Analog output 4-20mA, isolated.
Complete sample system built in to AMI’s patented cell block.
Very rapid response time from air to low ppm levels.
Easily replaceable sensor, no tools required.
T-2 sensor resistant to 10ppm H2S standard.
Simple, versatile installation.
Operates off 10-28VDC with very low power consumption
AC-DC converter provided
2 independent, fully adjustable alarm settings with relay contacts.
Oxygen Sensor life indication.

DETAILS

Trace oxygen – 0.00ppm to 25.0%
Ultra-fast come-down sensor
Positive pressure sample
Patented cell block minimizes sample volume, fittings and tubing.
Compact size – easy installation
DC power 10-28VDC
Low power
Precision state-of-the-art electronics
Isolated 4-20mA output
10 user-selectable analog output ranges
Fully Programmable alarm logic (alarm delays, hold-off, etc.) with relay contacts

FEATURES

Trace oxygen measurement from 0.05ppm to 25%.
Unaffected by sample flow rate changes between 0.1 – 5 SCFH.
Standard AMI T-2 trace electrochemical sensor.
Panel mount.
Compact size.
10 user selectable output ranges.
3 ½ digit LCD.
2 fully adjustable oxygen concentration alarms• RFI protected.
Isolated 4-20mA. analog output signal.
Power requirements: 10-28VDC <3 watts, supplied with a 115VAC to 12VDC adapter.
Low original cost and virtually maintenance free over its entire life.
Area Classification: Designed to meet General Purpose requirements.
2 year warranty for analyzer, parts and labor.
6 month sensor warranty.

SPECIFICATIONS

2001LC Series Standard ranges:
0 – 10 ppm, 0 – 50ppm, 0 –100 ppm, 0 – 500 ppm, 0 – 1000ppm, 0 – 5000 ppm, 0 – 1%, 0 – 5%, 0 – 10%, 0 –25%
Sensitivity: 0.5% of full scale
Repeatability: +/- 1% of full scale at constant temperature
Operating temperature: 41°F to 113°F
Humidity: < 95%, non-condensing
Maximum inlet pressure: 100psig.
Operational conditions: Pollution degree 2, Installation category I I.
Drift: +/- 1% of full scale in 4 weeks at constant temperature (dependent on sensor)
Expected cell life: 9 months to 2 years.
Response times:
90% of full scale in less than:
0 – 10 ppm 25 sec
0 – 100 ppm 10 sec
0 – 1000 ppm 10 sec
Output: 4-20mA isolated.
Alarm contacts: 230/117VAC @ 5A, or 28VDC @ 5A, resistive
Power requirements: 24VDC <10W.
Absolute Maximum Power voltage 28VDC
Overall dimensions: 9” w x 5” h x 3” d
Weight 5 lbs